WILWOOD BILLET SL6R's & SL4R's & MASTER CYLINDER

[BADDRIDE II]

**These are brand new in the box. They are radial mount application for 1.25" wide rotors.
**I also have a NEW Wilwood Polished 7/8" bore Master Cylinder to compliment these calipers.
**ALL items are new and in original boxes.

SL6R's - $325ea. shipped in USA (Summit Price - $409.73+tax) - same calipers used in C5/C6 & Mustang II Billet Superlite Big Brake Kits 13" or 14", among many others!

SL4R's - $380ea. shipped in USA (Summit Price -$451.39+tax)

7/8" Bore Polished MC -$188ea. shipped in USA (Summit Price - $239.95+tax)

:usa:
50169
50167
50168

[Riddler]

Would this master be good with the Dynalite calipers? I've got Dynalite's on all 4 corners of my Duster. I'm also planning to have a hydroboost setup on the car.

Riddler

[BADDRIDE II]

Hello Riddler, I do not believe this would be a problem. But to make sure it is the best for your application I suggest you call Wilwood and run it by them. Perhaps others will share their opinion as well. Let me know what Wilwood says. Thank you for your interest.

[Fuelie Nova]

If no one else takes it I might be interested in the M/C. I need to check with Baer and see how it would work with my system.
Tom

[BADDRIDE II]

If no one else takes it I might be interested in the M/C. I need to check with Baer and see how it would work with my system.
Tom

Just saw you responded to this, no problem. Just check with BAER, but I would bet they will frown when you pop the W word. Anyhow these are great MC and the 7/8" bore was what Wilwood recommended for these SL6's up front and SL4's in rear with 14" rotors. Let me know!

[ScottT]

I want the mc pm me w payment info

[firebirddady69]

where in california are you im verry interested?

[BADDRIDE II]

I want the mc pm me w payment info

PM sent!

[BADDRIDE II]

where in california are you im verry interested?

PM sent too!

[Chevelle598bb]

What are the part numbers for the calipers (front and rear). I am interested in the front and rear calipers.

[Quincy]

Master available? If so i'll take one.

[BADDRIDE II]

ttt

[that national]

can that m/c bolt up to a brake booster?

[BADDRIDE II]

can that m/c bolt up to a brake booster?

I believe so......like this? I always recommend calling manufacturer to verify your application though.:twothumbs

51163
Picture was for example purposes ONLY, I am not selling a booster, thanks.

[tommycomfort]

Usually a 7/8" bore master is used with manual brakes, but like Jay said, call manufacturers and research on here to find out for sure. Tom

[BADDRIDE II]

ttt

[Dsster]

is the rear caliper comes as a kit with the ebrake set up or just the calipers. sending you a pm for my contact info. call me pls

[BADDRIDE II]

I'll gift wrap.....

[diesel25lrs]

You still have MC?

[nitetrain4590]

Interested in the MC if it's still available?

[BADDRIDE II]

PM sent

[ScottT]

anyone know if I could use a second set of the sl6's like thats green drift mustang with a handbrake and hydraulic mc in car for drifting?