Chevelle598bb
10-12-2011, 04:08 PM
I have a few parts for GM A bodies (Chevelle, GTO, Skylark, Lemans, Cutlass, etc.) that I will not be using in my build.
Chevelle drum hubs clearanced for C5/C6 brake rotors, bead blasted, painted black, new 1/2 wheel studs installed, New timken bearings and races and new seals. For use with the Kore 3 brake brackets on factory 64-72 chevelle spindles. Used for mock up after modifications to the hubs. Not driven on. 95.00 Shipped.
Kore 3 C5/C6 brake brackets with hardware for 64-72 disk brake spindles. Used for mock up but never driven with. 105.00 Shipped.
Stock chevelle steering arms in good condition. Bead blasted and then painted black. 1/2 bolt size. 45.00 shipped.
Baer Tracker tie rods for 64-72 Chevelles with new inner tie rods. For stock spindle only. Used for mock up only and never driven on. 155.00 Shipped.
I am switching to an ATS spindle and don't need these anymore. Thanks Jason.
Chevelle drum hubs clearanced for C5/C6 brake rotors, bead blasted, painted black, new 1/2 wheel studs installed, New timken bearings and races and new seals. For use with the Kore 3 brake brackets on factory 64-72 chevelle spindles. Used for mock up after modifications to the hubs. Not driven on. 95.00 Shipped.
Kore 3 C5/C6 brake brackets with hardware for 64-72 disk brake spindles. Used for mock up but never driven with. 105.00 Shipped.
Stock chevelle steering arms in good condition. Bead blasted and then painted black. 1/2 bolt size. 45.00 shipped.
Baer Tracker tie rods for 64-72 Chevelles with new inner tie rods. For stock spindle only. Used for mock up only and never driven on. 155.00 Shipped.
I am switching to an ATS spindle and don't need these anymore. Thanks Jason.