PDA

View Full Version : 1968 camarocnice car



speedshftr
09-12-2011, 05:15 PM
folks i just dont have the time devote to and old car.this car as a lot of stuff done just to name a few
custom interior
all new pedals knobs ect,door and quarter glass are new.complely new interior with 500 flaming riverwheel
front and rear glass are the 2000 flushmount system that does away with factory stainless.it also has antenna in it.door looks and truck lock have been removed.electric kit to open trunk.
fesler machined aluminun door handles are a show stopper.fesler billet tail lights complete the rear out along with the ride tech gasfill kit.
the bumper has been fit tighter to the body and bolts we welded to the inside.rearpanels under rearwindow were welded up.new quarter on right an all emblems and antenna holes have been filled .the car has had the rain gutters removed and a very nice edge put on.the cowl vent has been filled in alond with hood indentions insame are.
car has new rushforth wheels and there sweet/car has 350 engine with eldo carb ect,all front suspenion rebuilt and all new gastank AND FUEL LINES HAVE BEEN REPLACED/complete 4 wheel disc setup from the right stuff. car is subaro blue.i hade the fenders welded to the valnce upper andlwer and 69 light grafted it.any questions pleasedont hesitate.im very east to deal with35k or best offer.ill help with transpoert somewhat

https://static1.pt-content.com/images/pt/2011/02/021311_1254-1.jpg
https://static1.pt-content.com/images/pt/2010/05/media1vv-1.jpg

https://static1.pt-content.com/images/pt/2011/09/082011_18541-1.jpg

https://static1.pt-content.com/images/pt/2011/09/082011_1856-1.jpg