PDA

View Full Version : Radiator Overstock Sale!!!!



SparkyRnD
08-25-2011, 10:10 AM
We have a few overstock radiators that we'd like to move out of the shop. These are all aluminum, tig welded by hand, and made right here in the USA with American materials, by American craftsmen. No epoxy and no plastic are EVER used on our products. Prices are listed below, and please email me for a shipping rate.



1967-1969 Camaro with V8 with trans cooler (non-LT / non-LS motors) SOLD
1962-1967 Nova 6-cylinder radiator (no trans cooler) $275
1962-1967 Nova V8 radiator with trans cooler SOLD
1955-1957 Chevrolet Tri-Five radiator (no trans cooler) $300
1949-1951 Mercury Flathead radiator with no trans cooler (SBF) $325
1949-1951 Mercury V8 Conversion radiator with trans cooler (SBF) SOLD
1967-1979 Ford F100/F150/F250 V8 radiator with trans cooler SOLD

Here is a picture of the Camaro unit:
https://static1.pt-content.com/images/pt/2011/08/Camaro1-1.jpg

More pictures are available on our website in the radiator section:
http://www.rndfabrication.com/CrossflowRadiators.html

We can send you an invoice through PayPal, and we ship promptly and email tracking numbers when the radiator ships. Contact me with any questions here or through email at [email protected]

SparkyRnD
09-15-2011, 04:01 PM
Still available, sold one of the ford truck units and one of the Nova units (thanks to those that emailed & purchased). Make offer on what is left, as we would like to see these in cars and not on the shelf!

SparkyRnD
10-05-2011, 07:30 AM
back to the top. if interested, send me a private message or email me at [email protected].

SparkyRnD
10-10-2011, 07:03 AM
If interested, send an offer as I would rather these go to PT members.

SparkyRnD
10-11-2011, 06:36 AM
Here are a few images of our radiators:

https://static1.pt-content.com/images/pt/2011/10/Merc1-1.jpg
https://static1.pt-content.com/images/pt/2011/10/F100a-1.jpg
https://static1.pt-content.com/images/pt/2011/10/Nova6cyl1-1.jpg
https://static1.pt-content.com/images/pt/2011/10/NovaV81-1.jpg

zombiekiller
10-11-2011, 07:00 AM
do you have anything 27-28" wide, 19" high with an upper passenger inlet and a lower driver's outlet? crossflow?

SparkyRnD
10-11-2011, 07:37 AM
Not at this time. We build our radiators to order, and do not have any 'universal' styles that we keep on the shelf. Having said that, we can build most anything and usually are well below the competitors prices. Is this for your Galaxie in your signature?

zombiekiller
10-11-2011, 09:08 AM
Not at this time. We build our radiators to order, and do not have any 'universal' styles that we keep on the shelf. Having said that, we can build most anything and usually are well below the competitors prices. Is this for your Galaxie in your signature?

yes. I'm in the process of swapping in a forged bottom end 306 turbo motor. I was given a nice mustang water pump, so i'm going to use it. My current rad is passenger side inlet and outlet and old to boot. The biggest rad I can squeeze in without hacking up my rad support and the grill mounting is 28" wide. The motor should run about 400 horse NA and most likely 550-600 boosted.

SparkyRnD
11-02-2011, 06:52 AM
bringing up again

SparkyRnD
11-02-2011, 06:55 AM
also, make an offer as we would like these off the shelf and in a car!

ScottT
11-10-2011, 04:41 AM
Will camaro radiator work in a 69 TA with a built 400 RA IV engine? What fan is recommended?

SparkyRnD
11-10-2011, 05:25 AM
yes, it should fit that model as well. For the fan, a lot depends on where you live, how hot the motor is, if you have a/c, etc. I prefer to get the largest fan I can fit with the highest cfm rating. We can get most any fan, from the private labels we regularly sell to Derale, Spal, and others.

SparkyRnD
11-12-2011, 07:14 PM
Camaro, F100 and one of the Mercury radiators have been sold. The list at the top has been updated for what remains.

SparkyRnD
12-31-2011, 12:37 PM
I updated the list for what remains, and dropped the prices down as well.