PDA

View Full Version : Bolt restoration kits


scarface50
08-07-2011, 03:18 PM
Does anybody know of any complete bolt kits for restoring and 82-92 camaro. I was hoping to find a kit that included the 8 engine cradle bolts and control arm bolts.

I can find plenty for anything before 82 but nothing on the third gen. I have checked classic industries, yearone, and a few other sites I have seen mentioned on here.

I was able to find a control arm only kit on Ebay, but nothing on the engine cradle. Any thoughts?
grenade inspector
08-07-2011, 03:59 PM
I would give frank at prodigy a call, I haven't dealt with him yet but I hear he's a great guy with many resources.

plus maybe if I plug him enough I'll get a discount lol
70 Chevelle
08-07-2011, 04:57 PM
If Frank can't help....
http://search.yahoo.com/r/_ylt=A0oG7ilkND9OQHEA1hxXNyoA;_ylu=X3oDMTEydmpkOG5 lBHNlYwNzcgRwb3MDMQRjb2xvA2FjMgR2dGlkA0RGRDVfODY-/SIG=11kcmhm31/EXP=1312786628/**http%3a//www.totallystainless.com/
scarface50
08-08-2011, 03:50 AM
Damn, totally stainless has everything EXCEPT what I'm looking for. Maybe its just not in the catalog. I'll give them a call.
scarface50
08-08-2011, 03:57 AM
Sent Frank and email, hopefully he has something. the prodigy website only has parts for camaros up to 81 though....
Happyfunballs
08-09-2011, 04:26 AM
Go here (http://www.thirdgen.org/techboard/) and ask around. Chances are you'll need to figure out the size and thread pitch and go to Fastenal, or facsimile thereof, to find what you're looking for.
scarface50
08-10-2011, 06:55 AM
I tried the thirdgen site before, really didn't get much. I think I'll make a trip to the local Fastenal. Every other bolt I can get no problem, so its just these 8. I may give a wire wheel a try. Anybody ever tried sand blasting bolts?
Happyfunballs
08-11-2011, 04:26 AM
I've do it and it works, but it's not ideal.
dstransam1
10-10-2011, 02:55 PM
try here.
http://www.amkproducts.com/default.htm
Johnny Blaze
10-19-2011, 11:22 AM
try here.
http://www.amkproducts.com/default.htm

They only list 1st and 2nd gen stuff.
wedgehead
10-20-2011, 07:05 PM
I take all my bolts to a local plater and have the zinc plated to look like new. They have a minimum charge of 25 to do all the front end bolts off of our 78 T/A.
Johnny Blaze
10-22-2011, 06:16 AM
Local plater? Must be nice, don't think there are any left around these parts.