parting out 67 mustang road racing project

[scotzilla]

I finally got the rest of the car pulled down and this is what ive come up with.

- currie nine inch, all new, nodular center section, spool, currie axles 58" axle flange to axle flange- im guessing 31 spline. if you are serious about buying it ill take the brakes off and count. Housing has large ford bearing ends on it. 3.73 gears $ 2236 from currie, $ 1700 our price

http://www.norcal1320.com/forums/imgcache/1990.imgcache.jpg

http://www.norcal1320.com/forums/imgcache/1991.imgcache.jpg

no brakes

- 17 x 11 6.5"bs with new yokohama 315 35 zr17 cobra wheels painted silver
17 x 9.5 5.5"bs yokohama 275 40 zr 17 on the front $1200
http://www.norcal1320.com/forums/imgcache/1992.imgcache.jpg


- 2nd gen camaro floor replacement panel dynacore 1046
$735 new $625 our price

- Centerforce clutch part number DF021057 $399 summit http://www.summitracing.com/parts/CTF-DF021057/

$ 300 our price new in box fits 4.6, 5.0, 5.8 liter
http://www.norcal1320.com/forums/imgcache/1993.imgcache.jpg

http://www.norcal1320.com/forums/imgcache/1994.imgcache.jpg

throw out bearing pt number st1714safm $26.99 summit $ 15
http://www.norcal1320.com/forums/imgcache/1995.imgcache.jpg

outdated RJS belts $20 each (2) sets
http://www.norcal1320.com/forums/imgcache/1996.imgcache.jpg

[scotzilla]

whhoopps

[scotzilla]

energy supsension bump stops in yellow- Ill pay you $5 to take these away
http://www.norcal1320.com/forums/imgcache/1997.imgcache.jpg

yellow corbeau racing seats (2) $229 from corbeau $ $150 each

http://www.norcal1320.com/forums/imgcache/1998.imgcache.jpg

jaz adjustable seat tracks $45 each from summit $30 each from us
http://www.summitracing.com/parts/JZP-450-011-03/

http://www.norcal1320.com/forums/imgcache/1999.imgcache.jpg

wilwood prop valve $25
http://www.norcal1320.com/forums/imgcache/2000.imgcache.jpg


Kill switch $20

http://www.norcal1320.com/forums/imgcache/2001.imgcache.jpg

fuel sell- not sure on make looks like summit maybe 20 gallons new $120
http://www.norcal1320.com/forums/imgcache/2002.imgcache.jpg
http://www.norcal1320.com/forums/imgcache/2003.imgcache.jpg

3 link rear suspension- $ill get back to you on that
http://www.norcal1320.com/forums/imgcache/2004.imgcache.jpg

wilwood remote master and reservoir $66 summit http://www.summitracing.com/parts/WIL-260-3374/

$40 new used for mock up
http://www.norcal1320.com/forums/imgcache/2005.imgcache.jpg

tiltonm pedal assembly complete with dual brake master and reservoirs and clutch master with resevoir $150


grant wheel and quick release hub $80
http://www.norcal1320.com/forums/imgcache/2006.imgcache.jpg
http://www.norcal1320.com/forums/imgcache/2007.imgcache.jpg

[scotzilla]

3 cans of wilwood brake fluid $15 for all (half off)
http://www.norcal1320.com/forums/imgcache/2008.imgcache.jpg

mallory battery and steel battery hold down( not sure if battery is good)
$35
http://www.norcal1320.com/forums/imgcache/2009.imgcache.jpg

67 coupe body with 12 point mild steel cage will cert to 8.50! $2300
http://www.norcal1320.com/forums/imgcache/2010.imgcache.jpg

mini tubbed will fit 335 +
http://www.norcal1320.com/forums/imgcache/2011.imgcache.jpg

http://www.norcal1320.com/forums/imgcache/2012.imgcache.jpg

http://www.norcal1320.com/forums/imgcache/2013.imgcache.jpg

body is decent, window slits have been welded and doors skinned to save weight. Firewall shaved minor rust behind rear window. THe rest is very solid, comes with steel trunk and aluminum dash.


4.6 h pipe $50
http://www.norcal1320.com/forums/imgcache/2014.imgcache.jpg

[trmexrunner]

are the belts 4 point if so both sets sold

[scotzilla]

bump-

one piece front end sold
completefront suspension and rear brakes sold
tilton pedals sold

still have the rear end and 3 link

[ryeguy2006a]

I want the wilwood Prop valve, how much shipped? 13827?

[Chad-1stGen]

Which wilwood fluid is that? The dot 3 570* stuff or dot 4 626* or?

[MrQuick]

unable to see the pictures posted.... scott can you email me pictures of the body please? [email protected]

[ryeguy2006a]

is the prop. valve still available?

[scotzilla]

prop valve sold and pics of the body are in this photobucket album

http://s36.photobucket.com/albums/e42/scotzilla/67%20mustang%20turning%20car/

a few more of the cage on page 2 of this album

http://s36.photobucket.com/albums/e42/scotzilla/

[scotzilla]

doesnt say dot 3 or 4 says O type 570 degree

[Takid455]

Battery tray w/o battery to 07840? PM w/ cost.

[scotzilla]

35 shipped to you

[maxamil]

Where are you located in Norcal? I'm looking for the 9" Center section if it is a 31 spline.