67 Camaro LOL zr1

[Somis]

So I'm still new to the pro touring type of cars Iv built drag cars all my life, my hole is to build my 67 Camaro to be more then completive with cars like the zo6 zr1's Exc.. I have my 67 Camaro that has been a street hot rod drag car. Now getting a LS7 (with some boost) and t56.

I'm looking for suggestions on what works best 3 link, 4 link, tq arm? Front clip AJE DSE......

The car as it was b4 I pulled it apart
https://static1.pt-content.com/images/pt/2011/07/Picture001-1.jpg

[Ron.in.SoCal]

Hey Somis...nice drivetrain you picked out. Answering your question is difficult unless you give a little more info about budget, level of fab you're willing to do or have done, and intended use. Take a look over at the suspension forum as this has been asked many, many times. Also give Frank a call; he'll have lots of ideas!

[Somis]

As for what I want to do with the car, everything! I want to be able to drive it as comfortably as a new corvette and be able to take out to the auto-x or through the canyons as well as the drag strip. As for budget I'm open to spending a good amount of cash, I'm strongly looking at doing a complete DSE set up, has anyone heard of problems with there 4link the AME uses new frame raile

[killer67]

Full DSE would be a lot of people's first choice - if you have the cash, you won't regret it. Probably can't do everything you are wanting perfectly but it may be the closest thing. TQ arm seems to handles the cones really well, though