How much do PTFE fuel lines cost, any brand recommendations

[DenRS]

I plan on replacing my fuel lines pretty soon. The lines on my 69 Camaro are 5-6 years old Russell proflex lines. Even though I haven't driven it much I would feel better to replace them with telfon lines in the near future so I don't have to worry about the ethanol eating away at them. I currently run braided 6an from the tank to the fuel pump to the carb. I'm debating whether to go back to the factory hardline and just use the PTFE lines from the tank to the hard line and from the fuel pump to the carb. Might be the cheapest route.

Any idea how much PTFE lines cost? Any recommended brands? Is it better to make your own or by them pre-made? I read a while back someone posted about having lines made by a company Brown and Miller Racing solutions, but they never mentioned how much they cost. I would assume that going that route would be expensive.

Thanks in advance

[1bad68cat]

I've used teflon lines and AN fittings from this company to make my own. The lines are on a 66 C10 and 66 Mustang. They have been on the truck and car for 8 months with no smell of fuel or signs of leaks. However, I only have short sections with the longest being 2 ft.

http://www.anfittingsdirect.com/

[wayne70]

Just replaced all the lines on my chevelle and used BATINC.NET

[DenRS]

I'll give those a look. Thanks for the links.