Kevin@W2W
06-24-2005, 08:36 AM
I can't believe I forgot to post a hello thread when I registered here....
Anyways, I started working for W2W in October of last year. I built and handle our website as well as take pictures, sales, and produce new artwork.
I've been around racing and hot rodding pretty much my whole life and have worked in the industry a little over 10 years. Right now I am 31 years of age.
I've owned several cars of the years and am working on a new project right now. I mostly a GM guy however I can appreciate just about anything with wheels, and a nice motor.
Now for my latest project
This could be considered my modern touring project you could say.
A few years ago I purchased a house so most of my car money has shrunk for a little bit. With that the scale of my vehicles has shrunk too.:)
Here is my Caddy CTSV-R 1/10 scale all wheel drive sedan.
It puts out a whopping 970 gm/cm of torque and handles like it's on rails.
With our given sense to modify and the availability of parts I've done quite a few mods to gain a competitive edge. I will be racing the car on indoor carpet tracks this season.
On with the pics.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
Here is the factory chassis after I finished building.
https://static1.pt-content.com/images/noimg.gif
Now in it's present state before I put the electronics back in it.
Mods include.
Aftermarket carbon chassis
All main pieces replaced with carbon alternatives
Billet control arm mounts
And a great speed controller with launch programs and really good brakes.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
So, thanks for checking out my thread and a proper hello to all and this spiffy little site on the net.
And, I have another project in it's planning stages. This one will be full scale:) Just need to start gathering funds.
Kevin
Anyways, I started working for W2W in October of last year. I built and handle our website as well as take pictures, sales, and produce new artwork.
I've been around racing and hot rodding pretty much my whole life and have worked in the industry a little over 10 years. Right now I am 31 years of age.
I've owned several cars of the years and am working on a new project right now. I mostly a GM guy however I can appreciate just about anything with wheels, and a nice motor.
Now for my latest project
This could be considered my modern touring project you could say.
A few years ago I purchased a house so most of my car money has shrunk for a little bit. With that the scale of my vehicles has shrunk too.:)
Here is my Caddy CTSV-R 1/10 scale all wheel drive sedan.
It puts out a whopping 970 gm/cm of torque and handles like it's on rails.
With our given sense to modify and the availability of parts I've done quite a few mods to gain a competitive edge. I will be racing the car on indoor carpet tracks this season.
On with the pics.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
Here is the factory chassis after I finished building.
https://static1.pt-content.com/images/noimg.gif
Now in it's present state before I put the electronics back in it.
Mods include.
Aftermarket carbon chassis
All main pieces replaced with carbon alternatives
Billet control arm mounts
And a great speed controller with launch programs and really good brakes.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
So, thanks for checking out my thread and a proper hello to all and this spiffy little site on the net.
And, I have another project in it's planning stages. This one will be full scale:) Just need to start gathering funds.
Kevin