OneLapCamaro Garage Sale - lots of stuff...

[James OLC]

Updated prices and availability - February 1, 2013

Well it's that time of year again... Time for what has become the annual OLC Garage Sale...

I'll add a couple more parts over the next day or two as I get info loaded up...

https://static1.pt-content.com/images/pt/2011/06/Chase20Cam20all-1.jpg

Chase Cam System #1 - $500
PDR100 recorder
600 line bullet camera
Standard Camera mount
5' Mini DIN camera extension cable
Remote AA Battery pack
https://static1.pt-content.com/images/pt/2011/06/Chasecam20PDR2-1.jpghttps://static1.pt-content.com/images/pt/2011/06/Chasecam20PDR2c-1.jpg

Chase Cam System #2 - $600
PDR100 recorder with G-force meter (auto start)
600 line bullet camera
Suction cup mount mount
Standard camera mount
5' Mini DIN camera extension cable
Cigarette lighter power adapter
PIM10 Power Isolation Module
https://static1.pt-content.com/images/pt/2011/06/Chasecam20PDR1-1.jpghttps://static1.pt-content.com/images/pt/2011/06/Chasecam20PDR1c-1.jpg

Buy both systems and I'll through in a dual recorder mounting kit ($89) and a case.

McLeod RST Clutch #1 - $700
Part Number 6912-07
Includes Aluminum Flywheel
Part Number 560530
Approx 3800 miles, very good condition
Complete - drop it in and go (more pics available upon request)
https://static1.pt-content.com/images/pt/2011/06/Clutch201-1.jpg

McLeod RST Cutch #2 - $300
aka "Smokey"
Part Number 6912-07
Includes Aluminum Flywheel
Part Number 560530
Needs clutch disks (available below)
Needs floater plate (it's badly warped)
Selling for less than cost of the flywheel - piece it together and go (more pics available upon request)
https://static1.pt-content.com/images/pt/2011/06/Clutch20220Flywheel-1.jpg

McLeod RST replacement clutch disks (front and rear disks) - $240 (pair)
Front disk PN 6919-07
Rear disk PN 6920-97
https://static1.pt-content.com/images/pt/2011/06/RST20Clutch20Disks-1.jpg

Anvil carbon fiber hood - $1200
PN 010043: Satin 67-69 100% Carbon Fiber Bare Hood
Used - body worked and painted by Best of Show
Includes 1 vent with screen - needs 1 vent with screen
Set up for hood pins but can use stock latch as well
https://static1.pt-content.com/images/pt/2011/06/OLOA201205bg0479s-1.jpg

Anvil carbon fiber rear spoiler - $250
67/68 Satin Carbon Fiber and Fiberglass Rear Spoiler
New - newer used, never mounted
https://static1.pt-content.com/images/pt/2011/06/Anvil20Spoiler203-1.jpg

Anvil carbon fiber header panel - $200
PN 010038: Satin 67-69 Carbon Fiber/Fiberglass Header Panel
New - never used, never mounted
https://static1.pt-content.com/images/pt/2011/06/Anvil20header202-1.jpg

Anvil carbon fiber cowl panel - $250
PN 010041: Satin 67-69 Vent Delete Cowl Panel with Recess
Used - body worked and painted by Best of Show

Michelin Pilot Super Sport tires 2 x 325/30ZR19 - $775 (pair)
New - never mounted - perfect condition
Marked for 2012OLOA

Michelin Pilot Super Sport tires 2 x 275/35ZR18 - SOLD!
New - never mounted - perfect condition
Marked for 2012OLOA

Michelin Pilot Super Sport tires 1 x 325/30ZR19 - $390
New - never mounted - perfect condition (located in IL)
Marked for 2012OLOA

Michelin Pilot Super Sport tires 1 x 275/35ZR18 - $225
New - never mounted - perfect condition (located in IL)
Marked for 2012OLOA

Kinsler Spec Bosch 10211 Fuel Pump – new in the box (was an OLOA spare) – Retail was $360, asking $300 obo plus shipping.
https://static1.pt-content.com/images/pt/2011/06/Bosch20Fuel20Pump2010211-1.jpg

Track Rat Engine - All aluminum 5.3L LS with Trick Flow heads. Made 445 ft.lbs. and 491 HP. You can see all the information on the build in the July '09 issue of Camaro Performers (http://www.camaroperformers.com/camaro-tech/engine/camp-0909-1968-camaro-ls-engine/viewall.html). Comes with harness and ECM - ready to run. Great engine in perfect condition but I have a line on a better suited engine for the wife's car if I can see this one.

Includes accessory drive - Concept One "Victory Series" accessory drive - black anodized with Sanden (Vintage Air) AC, powermaster alternator, and integral PS reservoir. Again all the information on the drive setup is in the June '10 Camaro Performers (http://www.camaroperformers.com/camaro-tech/engine/camp-1006-concept-ones-victory-series-drive-system/viewall.html)

Looking for $8500 complete. Will not seperate but I can remove the accessory drive if the buyer of the engine does not want it. Pickup in Escondido, California or I can arrange shipping at the buyers expense.

Engine (headers and engine stand are not included in the price):
https://static1.pt-content.com/images/pt/2011/06/camp_0909_021968_camaro_ls_enginemotor-1.jpg

Accessory Drive:
https://static1.pt-content.com/images/pt/2011/06/camp_1006_01_oconcept_ones_victory_serie-1.jpg

... everything is first PM or Email, first served.

Parts are in Central California (unless otherwise indicated) so delivery within California might be possible depending on timing and location.
Thanks for looking!

[Mr.VENGEANCE]

Hey James.

Interested in the Anvil Cowl delete and possibly the Anvil rear spoiler.

can you shoot me a shipping quote to 30341?

thanks!!

Amir

[James OLC]

All PM's replied to.

[Chad-1stGen]

Is the 67 getting a redo also?

[James OLC]

Maybe just a minor one - most of these parts were taken off over the last two years of tuning and tweaking.

[SD455]

PM sent,interested in rear bar.

Thx

[icemanrd19]

Send me a PM on the ls7 but wants the bottom price shipped on the fuel tank.

[ironcampig]

Could I get some more info on driveshaft please pm me thanks

[Gandalf]

Maybe just a minor one

A "Katech Street Attack LS7" for sale constitutes a "minor" upgrade? It's official - you have Rupp disease - seek help immediately!

Can't wait to see what you're up to James.
G

[Chad-1stGen]

A "Katech Street Attack LS7" for sale constitutes a "minor" upgrade? It's official - you have Rupp disease - seek help immediately!

Can't wait to see what you're up to James.
G

I was thinking the same thing LoL!! And also, how I justify to myself why I need to buy it even though I don't know the price James has in mind :)

[James OLC]

Send me a PM on the ls7 but wants the bottom price shipped on the fuel tank.

More information will be going out RE the LS7 tomorrow including specs, parts list, dyno sheets, etc. You're fifth in line for the fuel tank right now and will PM you to let you know if it's still available.


Could I get some more info on driveshaft please pm me thanks

I added some information to the description above - PM me if you need any more details.

[James OLC]

A "Katech Street Attack LS7" for sale constitutes a "minor" upgrade? It's official - you have Rupp disease - seek help immediately!

Can't wait to see what you're up to James.
G

Rupp disease? Really?


I was thinking the same thing LoL!! And also, how I justify to myself why I need to buy it even though I don't know the price James has in mind :)

Long story short - during one of several 1 am conversations on an anonymous highway somewhere during One Lap Mary and I were discussing what it was going to take to make a top 20 run with the car and top on the list was (a) traction control and (b) more horsepower. But (a) I can't do aftermarket TC with the ECM I have now and pulling the computer practically requires pulling the engine and (b) there is diminishing returns in trying to squeeze more power out of the Katech engine... rebuilding it beyond what it is makes it no longer a Katech engine (short of a mega$ refresh) and there are some ideas floating around...

[Rod]

How much for the little RED pozzi wagon? maybe if I haul my parts around in one of those the parts will get faster by proxy :naughty:

[James OLC]

How much for the little RED pozzi wagon? maybe if I haul my parts around in one of those the parts will get faster by proxy :naughty:

Priceless :)

[SD455]

Not sure if my PM's are getting through,no reply?

[James OLC]

All PMs replied to, inventory status updated.
Thanks
James

[lsb]

Is this tank still available?

[Beck01]

Payment sent for driveshaft - thanks.

[12sec ss]

any idea what the shipping on the gastank will cost to 11234?

[gEtyOpAPiOn]

pm sent via lat-g

[James OLC]

Updated list - the Rick's Tank is now sold pending payment as is the MOMO Steering Wheel. If there is an issue I will repost them and let everyone who was interested know.

Thanks
James

[James OLC]

The Rick's Stainless Tank (and the MOMO Steering Wheel) are both sold - thanks to everyone who was interested in these.

[mpozzi]

James,

The buyer for the tank and wheel PM'd me and I'm bringing both to Joliet.

Mary P.

[jgpclone]

can u email pictures of the anvil parts that have not been sold thanx
[email protected]

[James OLC]

Updated January 1, 2013 with this year's new (old) bits and pieces...

[724tim]

do you have any shirts for sale like before ?

[fireboy68]

Updated January 1, 2013 with this year's new (old) bits and pieces...


Is the accessory drive still available? I now see this is an old post.

Thanks for your time

[James OLC]

Given January 1 was less than a week ago it's still pretty current :) But that being said the accessory drive is not available until the engine is sold and nobody seems to need one right now.

[G_skillz81]

Interested in both the anvil header panel and cowl panel. I am international though. Can you get a shipping quote with FedEx for Moscow, Russia 115169?

[James OLC]

Updated

[john55blaze]

This might be a stupid question but can the carbon fiber parts from anvil simply be cleared to make them gloss/shiny?

[69Z28X11]

Second for the acc drive kit..

[James OLC]

This might be a stupid question but can the carbon fiber parts from anvil simply be cleared to make them gloss/shiny?

I would think that would work.


Second for the acc drive kit..

If the accessory drive comes available (and at this point it doesn't look like it will) I have you down as being in around fourteenth in line... I don't know what it is about these but the interest has been significant. I'll give the engine another two weeks and then bite the bullet and get working on the '67... the bodywork is ready and it's time to fit the engine and transmission.

[69Z28X11]

Lmao, sounds like it is.. Thanks anyways

[130fe]

PM sent.