protour73
06-17-2011, 04:59 PM
After my door panels were finished, I jumped right into this project. The stock gauge layout just didn't fit with the look of the rest of the car. My 2 biggest inspirations for this project were 2 buddies Doug and George (Orange71) , they fabbed some fantastic gauge packages.
https://static1.pt-content.com/images/pt/2011/06/IMG_3529-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3532-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3536-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3535-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3537-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3507-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3509-1.jpg
UPDATE - I got rid of the black phillips head screws and replaced them with some flat allen head screws with some nice machined finish washers
https://static1.pt-content.com/images/pt/2011/06/IMG_3736-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3734-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3529-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3532-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3536-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3535-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3537-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3507-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3509-1.jpg
UPDATE - I got rid of the black phillips head screws and replaced them with some flat allen head screws with some nice machined finish washers
https://static1.pt-content.com/images/pt/2011/06/IMG_3736-1.jpg
https://static1.pt-content.com/images/pt/2011/06/IMG_3734-1.jpg