TurboLark
08-31-2004, 08:23 AM
What main and rod clearances should I be shooting for with the following :
383 SBC, single turbo, street/strip/cruising, approx 900hp.
Looks like the crank I bought has been overly polished on the mains, and I'm looking at .0038 - .0042 clearances. looks like i will need to get the mains reground to .010 under.
My rods are at .0022 - .0025 , so should be OK.
383 SBC, single turbo, street/strip/cruising, approx 900hp.
Looks like the crank I bought has been overly polished on the mains, and I'm looking at .0038 - .0042 clearances. looks like i will need to get the mains reground to .010 under.
My rods are at .0022 - .0025 , so should be OK.