PDA

View Full Version : Magnaflow Super Sale, Best prices and in stock



ProdigyCustoms
05-27-2011, 02:11 PM
Magnaflow first gen F Body and 68-72 A Body

IN STOCK


We made a deal and have 10 each 2 1/2 and 3" kits for 67-69 F body and 5 each 2 1/2" and 3" for 68-72 A Body Magnaflow kits and have a special pricing lower then our normal low price until they are gone.

Kits are in stock and ready to ship

Prices INCLUDE shipping!

Even the big boys can't touch these prices

67-69 F body Magnaflow 2 1/2" X Pipe system, all stainless, polished stainless mufflers, $500 INCLUDING shipping!

http://www.protouringsuperstore.com/ProductDetails.asp?ProductCode=MAGNA15896

67-69 F body Magnaflow 3" X Pipe system, all stainless, polished stainless mufflers, $650 INCLUDING shipping!

http://www.protouringsuperstore.com/ProductDetails.asp?ProductCode=MAGNA15899

68-72 A body Magnaflow 2 1/2" X Pipe system, all stainless, polished stainless mufflers, $500 INCLUDING shipping!

http://www.protouringsuperstore.com/ProductDetails.asp?ProductCode=MAGNA15894

68-72 A body Magnaflow 3" X Pipe system, all stainless, polished stainless mufflers, $650 INCLUDING shipping!

http://www.protouringsuperstore.com/ProductDetails.asp?ProductCode=MAGNA15898

ProdigyCustoms
05-27-2011, 02:13 PM
Also, killer pricing on any Magnaflow product they make for any vehicle they make a system for, with FREE SHIPPING!

CliffS
05-29-2011, 10:08 AM
Frank,do you still have a 3'' x for my 68 f-body available?
Thanks,
Cliff

CliffS
05-29-2011, 10:14 AM
sorry 2 1/2

ProdigyCustoms
05-31-2011, 02:45 AM
Looks like (3) 2 1/2" systems sold over the holiday weekend Cliff so plenty left, you can check out online and just enter the Texas address for your shipping forwarder.

BTW, we run 2 1/2" every chance we can up to 550HP, I used to say only to 500HP until we blew right threw 500 with no problem at all with 2 1/2". The 3" fit great, but the 2 1/2" gives that extra bit of room

CliffS
05-31-2011, 04:12 AM
They (drop) ship this week Frank?

CliffS
05-31-2011, 04:14 AM
That little bit of room is what I'm looking for.
The Poncho Mill makes around 580 on the crank, hope the 2 1/2 is sufficient?

NvrDun71
05-31-2011, 07:29 AM
Do the first gen F-body systems carry the same P\N for 68-72 Nova? Curious if this will work on my 71' Nova?

ProdigyCustoms
05-31-2011, 10:11 AM
That little bit of room is what I'm looking for.
The Poncho Mill makes around 580 on the crank, hope the 2 1/2 is sufficient?

The 2 1/2 will be fine. Your system in in stock and will ship tomorrow if ordered today before end of business.

CliffS
05-31-2011, 10:21 AM
Order placed, had some hard time with country selection. States USA but should be Netherlands (ships TX)
Thanks.

ProdigyCustoms
05-31-2011, 10:24 AM
Do the first gen F-body systems carry the same P\N for 68-72 Nova? Curious if this will work on my 71' Nova?

No, different system, I have that system available through my distributor. I can do that one in 2 1/2" for $520 delivered.

I do not have that one on the site yet, you will have to call in that order

LSX1STGEN
06-09-2011, 10:37 AM
2.5" F-Body. How tight will this system tuck into the tunnel? Will it clear the bolt-in convertible x-brace? Lastly, will it clear the AIRBAR setup on the rear?

Thanks, Clay

tmadden
06-09-2011, 05:05 PM
Do we know which I need to clear that G Link? 2 1/2 or 3?

ProdigyCustoms
06-10-2011, 05:13 AM
2.5" F-Body. How tight will this system tuck into the tunnel? Will it clear the bolt-in convertible x-brace? Lastly, will it clear the AIRBAR setup on the rear?

Thanks, Clay

The 2 1/2 Magnaflow kit will clear the Hotchkis brace if you move 9" from the intermediate pipes and add that to the primary pipes between the headers and X Brace. moving the X Brace towards the rear a bit more. The tailpipes in the Magnaflow kit are not even close to clearing the Air Ride or G link kit, but we make 2 1/2" tailpipes to clear each system. The tailpipes cost nearly as much as the Magnaflow kit at $449. But with 9 bends and one cut and weld they are super labor intensive.

So in summary, if you order the Magnaflow kit and our Prodigy tailpipes, you have everything you need to make your exhaust system work but have a bit of minor fabrication still

Here is a pic under a convertible we did with the Hotchkis X Brace

https://static1.pt-content.com/images/noimg.gif

And a pic under MotiV8tr with the Air bar in it

https://static1.pt-content.com/images/noimg.gif

And a pic of G Link Tailpipes for tmadden on a car we are just finishing

https://static1.pt-content.com/images/noimg.gif

PT Goat
06-10-2011, 07:37 AM
Also, killer pricing on any Magnaflow product they make for any vehicle they make a system for, with FREE SHIPPING!

Price for a 2.5" system for 66 GTO? And I assume these don't come with downpipes?

ProdigyCustoms
06-10-2011, 08:00 AM
No, they are headers back and there is no down pipe kit specific for your car. I could send you a couple mandrel bends, probably a 45 and a 90 for each side should make it.

terrydmorgan
06-10-2011, 08:16 AM
Ordered mine yesterday. Thanks for the deal.

ProdigyCustoms
06-10-2011, 08:31 AM
Thank You Terry, your kit will ship today.

Only a few more of the 2 1/2" systems left.

LSX1STGEN
06-12-2011, 04:42 PM
Thanks for the response and recomendation Frank. I am sure that you've seen my order by now. I will be in touch for a couple more items: the tail pipes and possibly a vapor worx tank. I will give you a call this week to discuss our needs...

Thanks again,

Clay

ProdigyCustoms
06-13-2011, 02:50 AM
Got it Clay. Thanks. And were out of 2 1/2" after this one and the other weekend orders.

I have another 10 2 1/2" kits available to start shipping Weds

Still have (5) 3" kits in stock

CliffS
09-25-2011, 10:17 AM
The 2 1/2 Magnaflow kit will clear the Hotchkis brace if you move 9" from the intermediate pipes and add that to the primary pipes between the headers and X Brace. moving the X Brace towards the rear a bit more. The tailpipes in the Magnaflow kit are not even close to clearing the Air Ride or G link kit, but we make 2 1/2" tailpipes to clear each system. The tailpipes cost nearly as much as the Magnaflow kit at $449. But with 9 bends and one cut and weld they are super labor intensive.

So in summary, if you order the Magnaflow kit and our Prodigy tailpipes, you have everything you need to make your exhaust system work but have a bit of minor fabrication still

Here is a pic under a convertible we did with the Hotchkis X Brace

https://static1.pt-content.com/images/noimg.gif

And a pic under MotiV8tr with the Air bar in it

https://static1.pt-content.com/images/noimg.gif

And a pic of G Link Tailpipes for tmadden on a car we are just finishing

https://static1.pt-content.com/images/noimg.gif

Frank, do your 2 1/2' tailpipes also clear a standard gas tank besides a chassiswork g link? do they slide over the Magnaflow muffler to use a clamp or is it weld on? Thanks

rocketrod
09-25-2011, 10:38 AM
I will call you Monday to place an order for a 2.5" set for 69 Camaro

ProdigyCustoms
09-27-2011, 05:32 AM
I am back from RTTHs

CliffS
09-30-2011, 01:09 PM
I am back from RTTHs

Frank, you're probably busy with the new shop. I tried to phone you the last two days without luck. What is the best day/time to get a hold on you?

Thanks.

ProdigyCustoms
09-30-2011, 01:24 PM
Been painting last couple days. I have no message, Just leave me a number buddy or if you need a system you can check out at the store.

CliffS
10-01-2011, 11:59 AM
Busy guy! Hope everything goes ok with the new shop.
I purchased the Magnaflow 2 1/2 system, but since I switch to the Chassisworks g-link I am looking at the tailpipes you sell too. See my post above.

ProdigyCustoms
10-01-2011, 05:07 PM
I have a few sets of tailpipes in stock. But am away for the weekend.

Call me Monday.

AintQik
10-03-2011, 10:05 AM
Frank,
PM me a price for either the 2.5" or a 3" with the Air Bar and Ricks notched tank if you are still pushing these.
rj

ProdigyCustoms
10-03-2011, 10:48 AM
Cliff, tailpipes are on the shelf and I sent you a invoice

ProdigyCustoms
10-03-2011, 10:49 AM
Frank,
PM me a price for either the 2.5" or a 3" with the Air Bar and Ricks notched tank if you are still pushing these.
rj

I have them in 2 1/2" only (which is good for anything with less then a Top Fuel motor in it) and I have them for 2 1/2" mufflers and with the ends swelled for 3" mufflers

TnBlkC230WZ
10-16-2011, 12:08 PM
Hi Frank, I need a price on a different kit. Part number 15071, BMW 1M. Not sure what you can do on this.