small shopping list.

[GRNOVA]

Finally got the 65 Nova with a 2.8 kenne Bell SC parts list ready. Just need suggestions on where to get it all.

Suspension-
I want to change the old parallel 4 bar bushings to sphon or something similar.
(I want to shorten the top bars)
Also angle the top of the shocks inward towards center of car. what kind of mount for this they will be on the cross tube.

Headers-
Need LS flanges. These will be mild steel.
LS 317 heads going to be 1 7/8" primary, need collectors 2 1/2" of 3" and O2 bungs.
I want to run V bands also. 2 1/2" or 3"

Floor-

A pre-fabbed trans tunnel does anyone make these?

Paddle shifter
Vintage air

let the suggestions fly!

[shmoov69]

The suspension stuff I would prolly go with Marcus ar SC&C
On the headers, give Blake a call at 417Motorsports, he does quite a bit of LS Nova stuff. He is local to me and a super guy! Actually, he just did my 6 point cage and a new fuel tank for me. He could prolly point you in the direction you need for the other stuff too.
Call me for his # if you are interested.

Edit, This guy:
https://www.pro-touring.com/showthread.php?76959-Project-quot-Green-Bean-quot-....-ecotec-66-nova...&highlight=Green+bean

[GRNOVA]

Thanks Jimmy I call you this week! A cage, cool.

[GRNOVA]

Ok took care of a few items from the shopping list this weekend.
Vintage air taken care of thanks to Dontlifttoshift (Donny)
Header parts Steve @ Stainless Headers
Tube couplers thanks to Jason @ The GMR
... Just a few more items to go