TnBlkC230WZ
04-22-2011, 08:59 PM
I'm completing my eRod swap and I have a few spare parts left over. I'll post pics tomorrow if needed.
LS3 Corvette exhaust manifolds. These were taken off the new engine and have never been run. $125
LS# Corvette Oil pan. It includes the gasket, pickup tube and windage tray. Again, taken off a New LS3 engine. It has had oil in it because GM shipped the engine with oil in it. $125
Taurus fan. It includes the mounting brackets I made for mounting to a 3rd gen Nova. The fan blade and shroud are original but I installed a new motor in it about a year ago. $100
Bellhousing and adapter for installing a T-56 Magnum to a SBC or BBC engine. It is for a 153 tooth flywheel. It also include the bearing retainer, throw out bearing and fork all assembled. I've been told it will also work with a regular LS based T-56, but you need to confirm it. $175
All prices plus shipping. Mounting hardware not included.
LS3 Corvette exhaust manifolds. These were taken off the new engine and have never been run. $125
LS# Corvette Oil pan. It includes the gasket, pickup tube and windage tray. Again, taken off a New LS3 engine. It has had oil in it because GM shipped the engine with oil in it. $125
Taurus fan. It includes the mounting brackets I made for mounting to a 3rd gen Nova. The fan blade and shroud are original but I installed a new motor in it about a year ago. $100
Bellhousing and adapter for installing a T-56 Magnum to a SBC or BBC engine. It is for a 153 tooth flywheel. It also include the bearing retainer, throw out bearing and fork all assembled. I've been told it will also work with a regular LS based T-56, but you need to confirm it. $175
All prices plus shipping. Mounting hardware not included.