KlartDer
04-22-2011, 07:20 AM
Hi guys.
Hoping that someone can help me out with my MaxFire dizzy. I accidentally tripped over the coms cable while making some adjustments, and the solder points were ripped apart (between the serial connector and 4 pin connector). For some reason, Mallory wouldn't tell me which cables connect to each other, but they did propose to send out a new cable!?
Well, it's quite far from US to DK, and I really want to have the car running while the weather is good over here, so I was wondering if any of you Max-Fire or E-Fire owners could check with an ohm meter or similar, which coloured cables connect to which pins in the serial connector? Then I'll just solder the cables together myself :)
Thanks in advance,
Jakob
Hoping that someone can help me out with my MaxFire dizzy. I accidentally tripped over the coms cable while making some adjustments, and the solder points were ripped apart (between the serial connector and 4 pin connector). For some reason, Mallory wouldn't tell me which cables connect to each other, but they did propose to send out a new cable!?
Well, it's quite far from US to DK, and I really want to have the car running while the weather is good over here, so I was wondering if any of you Max-Fire or E-Fire owners could check with an ohm meter or similar, which coloured cables connect to which pins in the serial connector? Then I'll just solder the cables together myself :)
Thanks in advance,
Jakob