somcamaross
04-18-2011, 03:45 PM
I recently pulled my Haltech e6k off and sold it with the intentions of installing a FAST XFI, but in the process, my tuner retired and theres no way I will have time to spend on tuning myself. SO, I pulled the EFI off in favor of a Vic Jr. single plane and CSU blow through.
Anyways,
1. HSR has about 200 miles on it but I have had it installed on the car for about 3 years. I bought this new. It is completely polished and will get a once-over polishing before going out. Intake consists of upper and lower intake along with the pictured vacuum fittings.
-Please be aware that there are two 1/4 20 holes in the side of the plenum where I mounted my PCV catch-can. I am leaving the two stainless allen-head bolts in it. I can also throw the matching AN Quick-Disconnect PCV system in for another $30. There is at least $100 in fittings for it alone.
-Looking in the neighborhood of $460 shipped for the intake.
2. MSD 2013 50pph injectors. O-rings are only 4 months old. They all measure 12 ohms.
INJECTORS SOLD
Pictures:
https://static1.pt-content.com/images/pt/2011/04/418151761-1.jpg
https://static1.pt-content.com/images/pt/2010/09/418171926-1.jpg
https://static1.pt-content.com/images/pt/2011/04/418187391-1.jpg
https://static1.pt-content.com/images/pt/2011/04/IMG_2319-1.jpg
https://static1.pt-content.com/images/pt/2011/04/IMG_2321-1.jpg
https://static1.pt-content.com/images/pt/2011/04/IMG_2323-1.jpg
New look:
https://static1.pt-content.com/images/pt/2011/04/IMG_2435-1.jpg
If you have any Questions, Please feel free to ask.
Anyways,
1. HSR has about 200 miles on it but I have had it installed on the car for about 3 years. I bought this new. It is completely polished and will get a once-over polishing before going out. Intake consists of upper and lower intake along with the pictured vacuum fittings.
-Please be aware that there are two 1/4 20 holes in the side of the plenum where I mounted my PCV catch-can. I am leaving the two stainless allen-head bolts in it. I can also throw the matching AN Quick-Disconnect PCV system in for another $30. There is at least $100 in fittings for it alone.
-Looking in the neighborhood of $460 shipped for the intake.
2. MSD 2013 50pph injectors. O-rings are only 4 months old. They all measure 12 ohms.
INJECTORS SOLD
Pictures:
https://static1.pt-content.com/images/pt/2011/04/418151761-1.jpg
https://static1.pt-content.com/images/pt/2010/09/418171926-1.jpg
https://static1.pt-content.com/images/pt/2011/04/418187391-1.jpg
https://static1.pt-content.com/images/pt/2011/04/IMG_2319-1.jpg
https://static1.pt-content.com/images/pt/2011/04/IMG_2321-1.jpg
https://static1.pt-content.com/images/pt/2011/04/IMG_2323-1.jpg
New look:
https://static1.pt-content.com/images/pt/2011/04/IMG_2435-1.jpg
If you have any Questions, Please feel free to ask.