CFster
03-23-2011, 05:29 PM
Hi, looking for engine (or coil pack covers) for an LS3, but I don't want them to say Corvette on them.
The motor is in a GTO, so the obvious choice would have been GTO covers, but since I'm running the C5 accessory kit, the alternator is up high and the GTO covers don't have the right shape to accommodate that (sort of a cut out on the front). Also the fuel line comes in from the side, not the back as in the GTOs.
I've found a few companies such as Roto-Fab who make their own, but they're not cheap. I'm wondering if there are any other choices?
Thanks,
-Colin
The motor is in a GTO, so the obvious choice would have been GTO covers, but since I'm running the C5 accessory kit, the alternator is up high and the GTO covers don't have the right shape to accommodate that (sort of a cut out on the front). Also the fuel line comes in from the side, not the back as in the GTOs.
I've found a few companies such as Roto-Fab who make their own, but they're not cheap. I'm wondering if there are any other choices?
Thanks,
-Colin