recommendations on cooling system

[Z4MYBOYS]

My motor should be ready in approx. 1 week and would like to get some feedback on cooling. I do not have any cooling problems with the current zz4 motor. I am putting in a 406 600hp small block with 10.7-1 comp.and would like to loose the motor fan and go with the be cool with dual 11" fans. Will this be sufficient? All recommendation would be appreciated, I am concerned about running hot.

Thanks

[morrisclassic]

Hey,

I'm running a 383 Stroker with a/c. I use an Afco aluminum radiator with
double cores that are 1". Two 10" Zirgo fans.
I bought the radiator for $185.00 and had two brackets welded on the tanks for mounting.They pull 1500cfm each.
It cools well. You'll need the extra cooling with the compression.

Billy