PDA

View Full Version : Deal of a life time



kjwalters
03-14-2011, 11:43 AM
O.K Guys,

As much as this is going to kill me, due to a family situation I have no choice. I have to sell my uncompleted Pro touring car. I can do this a few different ways, i can sell all the parts seperatly, or i can sell the whol deal together. There is over $175,000 dollars invested in this car.
Check out my intro thread here: https://www.pro-touring.com/showthread.php?74132-New-Guy-V10-Ghia&p=737661&highlight=#post737661
You will find allot of pics of the build as it progressed over 3 years. I have more. It's alomost done alothough there are a few things to finish up like a rear end and radiator. i was going to run a IRS in the rear but you could just as easy run a soild axle, plenty of room for tires.
The engine was built right and so was the trans, no expense spared, well over $30,000 in just drive train alone. You could take the motor and tarns and drop it in anything you want, I have the custom wiring harness and re-programmed ECU (matched to engine combo) OBDII monitoring sytem etc.. It will easily make over 650HP and 600 FTlbs all day long without complaint. New Motor and trans NO miles!
The car is a work of art... The suspenion up front is All 1 Off as are some parts on the Motor, countless hours of design and Machining. The car is set up for Air ride, and i have a full Air ride Tech setup with controller. All the tin work is done and the body is currently in the Body shop getting massaged. It's not ready for paint yet, but will be soon. I was going to do a custom grey metallic, you can do whatever you want. The car was set up and clearanced to run 20"'s fornt and 22" in rear.
If some one wants the whole setup I may be able to work a free paint job and free interior in with the deal if you agree to show it when it's done and hande out a few flyers and business cards....the interior alone would be $10,000. Of course the paint and interiro would need to be done in IL at a specific locations that have already agreed to do the work. I will discuss that ONLY with potiential buyers.
All in all this is one BAD ASS car, my dream really. There is nothing like it out there, and rest assured the work done thus far is top notch. Finish it and have a car that will hold it's own at SEMA or any other top level comp and still drive 300 miles without thinking twice.
Everything is BRNAD NEW NEVER USED!!
There are pics below of some of the parts you will be getting, most of the hard work is done.

$49,000- no wheels and tires, you finish it.
Jamie
[email protected]
1-815-780-6170

kjwalters
03-14-2011, 11:55 AM
Forgot to mention
I have complete new chrome, and rubber for the whole body. I also have a full set of new glass, billet interior parts hidden door handles, rear view mirror, wiper arms...etc... power curved glass window kit, and shaved door and trunk release bla,bla,bla,bla. All goes with the body.

THE TECH
03-14-2011, 11:56 AM
Sorry to see such an interesting and cool project have to be sold.

dropit69
03-14-2011, 12:14 PM
WOW this sucks i remeber going thru this build page not long ago..awesome car...best of luck with the sale. !!!

kjwalters
03-14-2011, 12:42 PM
Thanks guys, It has been a labor of love. Someone is going to get a very sweet deal. I would like to se it go together, but it looks like I may have to sell the parts off piece by piece.
One day I will have a chance to do another, but I am sure nothing this radical.

skeeters65
03-14-2011, 02:34 PM
That is a really neat car..
What do all the sponsors think about you selling the car?

rsk68
03-14-2011, 02:39 PM
How much, need a price!

kjwalters
03-14-2011, 06:02 PM
How much, need a price!

Are you asking for a price on the whole package?

kjwalters
03-14-2011, 06:08 PM
That is a really neat car..
What do all the sponsors think about you selling the car?

I have the best Sponsors in the industry. They have had nearly 3 years of Promo including international magazine coverage and website promotion on some 16 national and international performance forums. This car has had more PR than most finished cars will have because of the quality of work and the radical nature. They understand my situation and all is good. I just wish I could have finished and drove this car.

Bill Howell
03-14-2011, 06:31 PM
As per forum rules, you got to put a price on the car, thanks.

Conrad283
03-14-2011, 06:49 PM
Killer ride. Sorry to hear about the troubles.

Mr.VENGEANCE
03-14-2011, 09:11 PM
numbers please...

kjwalters
03-15-2011, 02:37 AM
numbers please...


My number is 815-780-6170, Thanks

derekf
03-15-2011, 02:58 AM
Price is required on for-sale ads.

kjwalters
03-15-2011, 11:20 AM
Sorry guys I have tried 2 times to post a full list with pricing only to have it time out on me and erase eveything. I will do this in sections starting with the motor.

Gen 3 Viper V10 New, never run in a car.
ARP rod bolts
Cross pinned crank
Stage 2 rolling thunderz heads
Manely stainless 2.02/1.60 valves
Comp Cams Custom grind Roller can (rolling thunders matched)
Compa Can springs retainers and locks
Crower Shaft mount Roller rockers
Power Plus SFI approved Damper (nto shown in pics but included)
March Pulley kit
Deanz: Oil filter relocator (billet)
Deanz: Custom made Billet big flow Thermostate housing (have origial as well, chromed never used)
Deanz: Custom Power steerring pump
X-metal Big Mouth single balde Billet Throttle body
X-metal Solid billet Tall Valve covers
Extruda body custom billet fuel rails
Stainless Header MFG Sept Back 1-3/4 stainless custom Headers
Billet reusable oil filter (top of the line)

*** Please be advised some of the Billet parts shown in the pics (raw) are now either Polished, Chromed or Anodized) Picsturs on request.

$24,000 OBO
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

Here are some pics of the Parts ANO and Polished
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 11:23 AM
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 11:29 AM
https://static1.pt-content.com/images/noimg.gif
Above is the oil Pan

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 11:50 AM
O.K , Next up... Trans. Will post pics later.

T56- Transilla JR built by Rockland standard Gear in NY.
completly gone through and upgraded to their Transzilla JR specs, capable of handleing 1000HP
B&M short shifter
Quick Time SFI Bell housing
Ram clutches-Dual disc clutch, flywheel and Hydraulic bearing (cost $1500 alone)
Bad little tranny. Cost $6000 to build
$3700 OBO

kjwalters
03-15-2011, 11:53 AM
Fuel system: Full fuelab Digital Fuel system, capable of 1100HP
This system allows you to control the speed of the pump with a switch, Longest lasting pump on the market.
EFI Fuel Pump, Pre Filter, Post Filter and EFI Regulator and Fittings, all -10AN setup.
$900 OBO

https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 01:44 PM
I have decide to let the front suspension go with the chassis and body. Her are a few pics of the parts.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 02:59 PM
Next is the body and chassis
Car is all steel no rust, custom chassis set up for 20" in the front 24" in the rear. run what you want, plenty of room.
Clearanced for V10 upfront, you can run a SBC or BBC easy enough.
Rear is set up fpr IRS, but can easiliy run a shortened 9" or whatever.
IFS in the front (see above) Will also be included with the body (over $12,000 in parts)
Collcage
FUll custom tin work
Flip front end ...done right!!
I have all new wether stripping and Chrome for this car
New set of Glass all the way around
I will also include the custom side exit exhaust and mufflers made by Stainless Header MFG
Also incuded is the full secondary slide steering setup made by Deanz. All pecies have been chromed or polished (see pics below)
Custom hand formed dash
Have new headlights with Halo
Also new Rear tails
No telling the hours we have sent over the past 3 years building this car. $12,000 OBO for everything listed plus some extra stuff I have as well.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 03:02 PM
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 03:03 PM
https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 03:07 PM
These go with the chassis: *****Spindles and steering arms go with the Front suspension setup.****
Will deal with the guys whole buys the chassis. Theres more parts not shown.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

kjwalters
03-15-2011, 03:10 PM
Next, Compelete Air ride Tech suspenion setup. It's brand new , never run with controller....AND 4 brand new billet 8000 series double adjustable shocks.
$2000 OBO Pics to follow. Perfect condition

jfreakofkorn
04-27-2011, 04:52 AM
Just seen the link this that was added to this section. What a wild build...

michael6372
04-27-2011, 07:36 PM
This is one awesome project! Is it still for sale? Have you sold any of the parts?
Thank you.

Michael.

michael6372
05-06-2011, 02:14 PM
Is the car still for sale????