PDA

View Full Version : Newbie here!


demon1515
03-01-2011, 08:13 PM
Sup guys New guy here, Juan Castillo a Puertorican living in GA, Dodge Dart street rod for now still in the process of buildup but nothing that a set of wheels can take care of, I KNOW I KNOW, i don't have a corner carving machine so is not a PRO TOURING, well i bet this car can corner not like a Ferrari but it will be a fun car, as for now it got a set of 15x10 4 inch backspace and 15x4 but in a near future i will get a set of 18x10 and 17x8 staggered set of Volk Racing TE37's in satin black to ad to my car, i really try to have my cake and eat it too, i know i will not be the fastest on a road course but hell i will look good on the street, i wont be the fastest on the 1/4 but it will be fun ripping some 10's in this (i hope) for now here is a rendering i get of my car with the drag look, i still need to have the pro touring rendering that is not other than this same one with a wheel change, stance will be similar as the front suspension in these cars is adjustable ride height talking and the rear i made it adjustable with leaf springs front bracket holes on the spring relocation kit, that later on will be changed for a custom unequal 4 link coil over setup!

https://static1.pt-content.com/images/pt/2011/03/renderingdart15151-1.jpg
RicerwannaB
03-01-2011, 09:43 PM
Welcome
THE TECH
03-02-2011, 06:29 AM
Welcome to the forum!
CruizinKev
03-03-2011, 08:29 AM
welcome aboard!
67zo6Camaro
03-03-2011, 10:10 AM
Welcome, look forward to seeing your progress.

Brett
demon1515
03-03-2011, 08:22 PM
I will post it later on the proper forum, Thanks for the warm welcome!
cobragt
03-03-2011, 10:21 PM
Welcome aboard! Where are you in Georgia? I'm in Lilburn/ Lawrenceville area.
demon1515
03-04-2011, 04:52 PM
I am in Mableton close to Smyrna and Austel.
cobragt
03-04-2011, 10:05 PM
Cool, If you didn't know, Caffeine & Octane cruise in starts at 8 AM this Sunday morning and runs until 11 AM in front the movie theater near North Point mall in Mansell Crossing shopping center. I may be going but it all depends on the weather.
go-fish
03-04-2011, 11:38 PM
Cool car. Wish I could do both, full on drag car and a pro-touring car. So, what kind of suspension do you have under the front? If it is still the t-bar set up, Hotchkis has that sweet front suspension kit for stock suspensions. The guy that owns Redline Gauges had Hotchkis put some work in on his A-body.

I take it your car is already tubbed because of the 10" wheel under the rear? At least you have that out of the way.