PDA

View Full Version : LS-X Stroker parts! NIB!!



The_Humbler
02-25-2011, 08:22 AM
Going in another driection with my project and need to sell a few parts. All of them are brand new in the box. I will have more, I just gotta find it first.


All parts are for sale locally and local buyers, i.e., pick up the parts, will have first preferrence on the big stuff.

The stroker kit is being sold as a set. Will not break them up.


Eagle FORGED ESP 4340 crank. 24 tooth reluctor, 54lbs. PN: 434640006100

Eagle FORGED ESP H-beam rods, 6.125", PN: CRS6125B3D

Diamond Racing FORGED pistons 4.030" bore with wrist pins, locks, and stock rings (rings aren't that great for performance)

Diamond racing 4.030" bore file fit plasma rings PN: 9024030

All the above, $1700 obo. The kits basically retail for around $1900.

44909

The_Humbler
02-25-2011, 08:29 AM
Located in Ma.

The_Humbler
02-27-2011, 05:58 PM
Very, very surprised no one has snapped this up yet...

LCAC_Man
03-01-2011, 01:10 PM
402 cubic inch?

The_Humbler
03-01-2011, 02:00 PM
406".

cclark
03-01-2011, 07:31 PM
Ok, Im new to this thread stuff. Will these parts work on an LS2?

The_Humbler
03-02-2011, 05:33 AM
Ok, Im new to this thread stuff. Will these parts work on an LS2?

Yes and no. The ls2 block can only be bored to .020" with the stock sleeves. You can resleeve the block or use a lq-x block and it will work. Or, you can buy/trade for .020" pistons for these rods and crank.

The_Humbler
03-03-2011, 04:43 AM
I dont wanna put this stuff on ls1tech guys, but I'm getting close.. This stuff will sell there or on ebay!

The_Humbler
03-05-2011, 03:20 PM
Going on LS1Tech tomorrow...

The_Humbler
03-13-2011, 04:56 PM
Lots of intrest here and there, but no one with $ on the table.. Figured this would be the first to go not the last!

gcallahan
04-08-2011, 08:11 PM
is it balanced?

The_Humbler
04-09-2011, 02:24 AM
You cannot balance a rotating assembly without the flywheel and balancer.



Parts sold 3-4 weeks ago on LS1Tech.....

gcallahan
04-11-2011, 08:05 PM
ok good to know, i also sent you a pm