PDA

View Full Version : Need hubs redrilled



Motorcitydak
02-24-2011, 08:41 PM
I am going to need some c6 hubs (rears if that matters) redrilled for a 5x4.5 bolt pattern. They have the 5x4.75 from the factory. Any leads on who could do that for me? I have one junk hub that Im using for mock up and ill just use the ole drill press to put a few new holes in it to mount the wheel but no way would I do that for the new ones that will see the road.

novaderrik
03-19-2011, 09:40 PM
any machine shop will be able to do it.