PDA

View Full Version : Rushforth Wheels' scrap pile available for mockup



JayR
02-22-2011, 10:50 AM
It's just like it sounds. We gathered up all the blems and scrap centers that aren't suitable for the light of day but are perfectly fine for mockup wheels, rolling the car around the shop, putting tires on, measure for backspacing etc. A very handy tool for any shop.

We have 17, 18, 19, and 20" centers and will drop them un-welded into a brand new hoop for $269 each whether you just need one to experiment with fitments or a full set of 4.

For the budget minded fabricator who is also creative and handy, we can just sell you a center which you can attach a 2x4 across to simulate a tire section and very easily determine your width, tire size and backspacing by cutting the wood to fit in your wheelwell and then turning the wheel to be sure it doesn't have interference, then measuring it's overall width and it's backspace. Bare centers are only $129 each.

LUACE
02-22-2011, 12:56 PM
Sounds like a good option for a spare tire...

JayR
02-22-2011, 01:27 PM
Sounds like a good option for a spare tire...

That's a great idea, Lou but it will require welding them up which will bump them to $425 each.

DEIGuy38
02-22-2011, 08:47 PM
Sounds like a nice garden hose reel to me

Blitz
04-15-2011, 07:33 AM
Ohhh man. The ideas. :idea:

Bigblue73
04-15-2011, 07:36 AM
Sounds like a nice garden hose reel to me

You read my mind! I can replace my old chrome reverse with a new Rushforth....Talk about a garage make over!