1 3/4" chromoly thick wall

[Evldoer]

I need to find some chromoly in 1 3/4" that has a thicker wall, like .100 or so for some shock mounts. I dont need much, and I need it bent, I only have dies for 1 5/8". So a piece that is bent over 90 degrees would do just fine. Anyone have a source for me? Thanks



Mike

[Jim B]

you might try these guys, not too far from you- Jim

http://autoweldchassis.com/index2.ivnu

[coolwelder62]

Mike, If you are still looking for a bent pc.1.75 x.120 4130 tube I can help you out.Shop phone 1.785.594.7481 call me and let me know what you need.Scott

[Evldoer]

Just wanted to say thanks to Coolwelder62 for helping me out with some tubing. Thanks Scott!

[coolwelder62]

Sorry it took me awhile to get that tubing to you.