Ringbrothers 1970 Camaro

[Ringbrothers]

1970 Camaro we've been working on.
Mast Motorsports LS7 640 hp
Tremec 5-Speed
Ford 9' Rear with Locker
3-Link Rear Suspension
DSE Quadralink Hydroformed Subframe
Forgeline Wheels
BF Goodrich Tires - 275 35 18 Fronts, 335 30 18 Rears
Flowmaster 40 Series Mufflers

https://static1.pt-content.com/images/pt/2011/02/DSC01750-1.jpg
https://static1.pt-content.com/images/pt/2011/02/1020002-1.jpg
https://static1.pt-content.com/images/pt/2011/02/0422032-1.jpg
https://static1.pt-content.com/images/pt/2011/02/1192011014-1.jpg

[4OfaKind]

This should be fun.

Hey is that Marty's Camaro?!

mal

[Conrad283]

https://static1.pt-content.com/images/pt/2011/02/woot-1.gif

This should be good

[73lt4]

Holy Cow! Cool!

[redressonance]

ooOoO!! I see faint draw-over marks on the hood. Any wild plans like what you did with after burner?

[amargari]

Subscribing to see what magic you do to an early 2nd gen.

[LeighP]

Wow, I'm liking the body mods so far.

[srh3trinity]

It is about time the Ring Brothers put their stamp on a second gen. This should be good, I have liked everything that has come out of their shop.

[protour73]

Ring Brothers doing a 2nd Gen? Oh THIS is going to be good!!!! and long over do for some 2nd Gen love from a shop like Ring Brothers.


Hey is that Marty's Camaro?!

mal

that is not Marty's Camaro

[ChevelleNV]

Sick... Love the tail pipe outlets...

[colt zantop]

that exhaust exit is SICK! keep us updated!

[67speedfreak]

Love the rear of the car !

[badbu68]

Luv it! After this, how bout a 68-9 chevelle? Perfer it be mine as well... :)

[Scarelane]

Very cool! Hope to see you guys at the Car Craft Summer Nationals in St. Paul again this July!! Loved the Fairlane you had there last year.

[johnny68]

im starting to get into 2nd gens very cool build'
john

[Project69]

Looks good so far.

[sixgunsblazing]

Oh dear.

[no1mikenz]

what type of rear end did you use

[Ringbrothers]

This should be fun.

Hey is that Marty's Camaro?!

mal

We are building the care for Bob and Char from MN. Great people to work with!

[1red68]

nice! i always had a soft spot for 70's! i can't wait too see the end.

[ramlinman]

looking forward to following this build

[absintheisfun]

Looks incredible! I can't wait to see more.

[formula]

Great. Now we're all screwed.

Who did the 3 link?

[stage2ROUSH]

chin spoiler is hot !!!!!!!! lovin that car !!!

[Chevrolaine]

Insane looking!

[newmexicosaint]

Sick....simply S.I.C.K.

[qwik1320]

Very cool, can't wait to see how this turns out!

[WS6]

stealing a line from Tyler: That's Sofa King Cool!

[TBART70]

Wow!

[buickfunnycar.com]

subscribed...

[cdoggy81]

Ringbrothers doing a 2nd Gen... ya, I'll be watching this one!!!

[cobraguy65]

Subscribing

[Ringbrothers]

what type of rear end did you use

The car came to us with the rear suspension in it. We heavily modified it. Not sure what it was originally.

[Ringbrothers]

Belly pan looks nice....
https://static1.pt-content.com/images/pt/2011/02/020711001-1.jpg
https://static1.pt-content.com/images/pt/2011/02/020711002-1.jpg

[Ringbrothers]

https://static1.pt-content.com/images/pt/2011/02/EngineBay-1.jpg

[cdoggy81]

Wow, that's some sick metal work!!!

[csx4766]

Another work of art by the Ring Brothers. The exhaust outlets should be trade marked and I love the belly pan. And that front chin spoiler is sexy and.....:jump:

[silver69]

Looks great fab work incredible.

Joe

[parsonsj]

Nicely done! I see the secret to your great metalwork: Miller welders. :cheers:

jp

[formula98]

This is really an AWESOME build. Love the Belly Pan.

[whayden2003]

thanks for ruining my plans of having the baddest second gen on the planet..

[DBG]

Whats the color combo your going with on this one?

[stryfe101]

utter hotness, I love every car yous guys build

[Wesley J]

https://static1.pt-content.com/images/pt/2011/02/EngineBay-1.jpg

I was about to ask if you lost you dimple dies but there they are, LOL! Beautiful work!

[PonchoJohn]

Loooks great so far!

[Ringbrothers]

Whats the color combo your going with on this one?
Haven't picked a color yet. I think they have something in mind but nothing solid yet.

[johnny68]

very cool as always its a shame to put paint on that metal work
john

[Ringbrothers]

I loaded some pictures to our Facebook (http://www.facebook.com/pages/Ringbrothers/186757648031118?v=wall) page too. Check it out.

[Jims78elky]

Just amazing metal work you guys do on all your projects ,keep up the great work on this one!


-Jim

[LeighP]

beautiful work.

[twosaturns]

did the owner request you make the nose just like the one DSE did for Dale Jr's '72?

[CruizinKev]

wow this is sick! :twothumbs

[Zanie]

Wow!
What are those 4 inch tails? They look like they should be dribbling water, like the ones on my boat!!

Crazy Cool stuff as normal from you guys!

[Ringbrothers]

Things are moving along!
https://static1.pt-content.com/images/pt/2011/02/35-1.jpg
https://static1.pt-content.com/images/pt/2011/02/40-1.jpg

[Ringbrothers]

did the owner request you make the nose just like the one DSE did for Dale Jr's '72?
I'm not sure I see the resemblance. I thought Dale Jr's was more stock but I could be wrong?
Currently we are using the stock grill an will keep the split bumper. The parking light buckets have been enlarged to be funtional brake ducts combined with the bumpers. The spoiler is 100% custom.
https://static1.pt-content.com/images/pt/2011/02/41-1.jpg
https://static1.pt-content.com/images/pt/2011/02/42-1.jpg
https://static1.pt-content.com/images/pt/2011/02/Dales-1.jpg
ps I found this picture on google images - it was not protected so I hope I don't piss someone off by using it.

[Ringbrothers]

Begining stages of a roof scoop....
https://static1.pt-content.com/images/pt/2011/02/38-1.jpg
https://static1.pt-content.com/images/pt/2011/02/37-1.jpg

[Bryce]

what does the roof scoop do?

[Roberts68]

what does the roof scoop do?
Mostly just entice people to ask that very question.:pat:

:cheers:

[ChevelleNV]

Mostly just entice people to ask that very question.:pat:

lol.....so its a bedazzler....

[Ringbrothers]

what does the roof scoop do?
I believe it is mostly for looks but there will be a brake light in it too.
Staci

[FRENCHBLUE72]

I'm in cant wait to see this one finished you guys do incredible work..

[twosaturns]

I'm not sure I see the resemblance. I thought Dale Jr's was more stock but I could be wrong?
Currently we are using the stock grill an will keep the split bumper. The parking light buckets have been enlarged to be funtional brake ducts combined with the bumpers. The spoiler is 100% custom.


the DSE car's nose and upper valance is heavily modified. both yours and theirs have elements from a standard camaro nose and an RS nose; the larger grill and lower parking lights from the standard nose w/ the round parking lights and small bumpers from the RS nose.
don't see how you don't see the resemblance; or maybe it's just me :)
please don't take it wrong, I LOVE this car and your work, amazing stuff. I was just asking a question.

[Wesley J]

https://static1.pt-content.com/images/pt/2011/02/42-1.jpg
[

So, are you leaving the "scoop" in front of the front wheel well open or putting mesh in it or something like that? That would look frickin awesome!

Also, whats the purpose of sanding all of the metal long before any epoxy goes down? It looks killer and I do the same but I cant see a good reason.

Beautiful work as always.

Wes

[Bryce]

Also, whats the purpose of sanding all of the metal long before any epoxy goes down? It looks killer and I do the same but I cant see a good reason.

Beautiful work as always.

Wes

It looks cool in pictures!?!

[PonchoJohn]

I believe it is mostly for looks but there will be a brake light in it too.
Staci
Exactly what I was thinking I'd use it for... it looks interesting, too.

[buickfunnycar.com]

Haven't picked a color yet. I think they have something in mind but nothing solid yet.

As I mentioned on NastyZ28.com,I'm hoping it's a kicked-up version of Citrus Green...

Beautiful work guys...par for the course on a RB build!

[LeighP]

Cool...love Citrus Green....

[Ringbrothers]

So, are you leaving the "scoop" in front of the front wheel well open or putting mesh in it or something like that? That would look frickin awesome!

Also, whats the purpose of sanding all of the metal long before any epoxy goes down? It looks killer and I do the same but I cant see a good reason.

Beautiful work as always.

Wes
Wes - I think there will be some kind of mesh in there. They have to get down to the bare metal to do any welding so they sanded the whole car.

[Ringbrothers]

Dash progress
https://static1.pt-content.com/images/pt/2011/02/43-1.jpg
https://static1.pt-content.com/images/pt/2011/02/45-1.jpg

[67 ls1 vert]

looks really nice.

[johnny68]

just curious what seat are you using
john

[killer67]

Looks like Recaro Specialist

[Ringbrothers]

Looks like Recaro Specialist
You are correct.

[jy211]

when you guys decide to do a 56' chevy I have the perfect one ready and waiting LOL. Awesome work BTW!

[MrQuick]

what does the roof scoop do?

it breaks up the airflow over the roof to make the spoiler more effective.

vince

[Ringbrothers]

Sorry I've been neglecting you guys
https://static1.pt-content.com/images/pt/2011/03/47-1.jpg
https://static1.pt-content.com/images/pt/2011/03/46-1.jpg

[Ringbrothers]

https://static1.pt-content.com/images/pt/2011/03/50-1.jpg
https://static1.pt-content.com/images/pt/2011/03/49-1.jpg

[Ringbrothers]

https://static1.pt-content.com/images/pt/2011/03/48-1.jpg

[BonzoHansen]

oh good lord

can I sit in it at sema and make vroom vroom sounds? pretty please?

[monteboy84]

Haha even the gas filler tube is absurdly custom, I love it. That shifter linkage is pretty nifty too :)

-matt

[ramlinman]

i love every bit of this build waiting for more

[Ripped]

Fabulous metal work. I can't wait to see more!

[aussie69camaro]

oh my!
Engineering & design at its best
Please excuse my ignorance, but what is the smaller cap for on the fuel filler?? Is it a breather cap when filling??

[Ringbrothers]

oh good lord

can I sit in it at sema and make vroom vroom sounds? pretty please?
If it is there - absolutely!

[BonzoHansen]

If it is there - absolutely!

Sweet!!!!

[67 ls1 vert]

cool, speakers out side the car!!

[johnny68]

jinxie now thats funny
john

[RicerwannaB]

Damn....Thats all I have to say.

[MuscleRodz]

https://static1.pt-content.com/images/pt/2011/03/48-1.jpg please tell me more about this shifter relocation piece. One off? production part?

[67chevILL]

am a looking and am a liken' that gas filler tube.
:hail:

[Ringbrothers]

Please excuse my ignorance, but what is the smaller cap for on the fuel filler?? Is it a breather cap when filling??

It's a vent. I didn't know either.

[Ringbrothers]

please tell me more about this shifter relocation piece. One off? production part?
That's a one-off piece.

[GrabberGT]

It's a vent. I didn't know either.

OK... Now Im confused.

Anyway... Are we going with a stripped down trans-am racer theme and leaving all this awesomeness exposed or are we covering it up. I vote for leaving it exposed with minimal creature comforts... or at least making it look like it is missing creature comforts.

Awesome build... I've got a Maverick for you when your ready. :D

[LeighP]

Damn........love that work.

[Ringbrothers]

https://static1.pt-content.com/images/pt/2011/03/541-1.jpg
https://static1.pt-content.com/images/pt/2011/03/53-1.jpg
https://static1.pt-content.com/images/pt/2011/03/521-1.jpg
https://static1.pt-content.com/images/pt/2011/03/511-1.jpg

[Roberts68]

Can you please tell me if the clamps you show on the harness draped over the steering column are stainless with silicone rubber?

The silicone is not a priority to me but I exhausted several sources seeking stainless straps awhile back. Various plated/coated varieties is all I could find.

This is the first of your builds I have followed but I have seen your finished products. It's really intriguing seeing it come together and picking out all the changes. Thank you for sharing it.

[Bryce]

i sell stainless clamps at my hardware store, Mcmaster also has them.

BTW, cool build!

[LeighP]

Those look to be aircraft cable/pipe clamps - made by ADEL.
Heres their site...they do various band materials including stainless.
http://www.adelwiggins.com/CatDtl.cfm?cid=103

[Ringbrothers]

Can you please tell me if the clamps you show on the harness draped over the steering column are stainless with silicone rubber?

The silicone is not a priority to me but I exhausted several sources seeking stainless straps awhile back. Various plated/coated varieties is all I could find.

We get the clamps from our local Car Quest store or McMaster Carr. If you need more info I can see what I can find - email me at [email protected]

[jreut703]

nice build the car is sweet.great custom work

[go-fish]

Sweet Baby Jesus!

[buickfunnycar.com]

https://static1.pt-content.com/images/pt/2011/03/53-1.jpg

Interesting use of door handles...wouldn't have figured that.

[spaghettio]

whats the story on the mustang in the background?

[Chevrolaine]

whats the story on the mustang in the background?

It's another one they hope to have done by SEMA. Actually widening the sides of it outwards about 3"!
I visited their shop Friday and I must say you won't find nicer people anywhere! Jim actually came back from lunch and spent time with four of us on a tour of the shop and cars in progress! He and Sean made us feel like old friends and we had just met an hour earlier.
Honestly can't thank them and Nancy and Tammy enough for the hospitality they showed us that day! Thank You!

And MCJ those door handles are killer! That's just an unfinished one on there but the black or grey ones I held in my hands were simply stunning and I may put the black ones on my 72 also. Freakin beautiful piece!

[SSL]

Yet another unbelievable design concept with impeccable build quality... You guys make most pros look like rookies!

[jc72]

i like the mods done.... the frnt valance is great n the rear lower panal mod as well... do u fab. n sell those parts? also do u think what i want is possble,22s in rear of my 72 camaro?

[cdoggy81]

22's... what what, holla..... (Totem, calling Totem :) )
https://static1.pt-content.com/images/pt/2011/03/51Y4DeY4rDL-1.jpg
https://static1.pt-content.com/images/pt/2011/03/jada_71camaro_2005-1.jpg

[Ringbrothers]

i like the mods done.... the frnt valance is great n the rear lower panal mod as well... do u fab. n sell those parts? also do u think what i want is possble,22s in rear of my 72 camaro?

The front valance and rear panels are one-off fab works so they parst won't be for sale - sorry.

[Ringbrothers]

Just now getting caught up from being out for the Hot Rod & Restoration Show. Amazing what was done while I was out!
https://static1.pt-content.com/images/pt/2011/03/57-1.jpg
https://static1.pt-content.com/images/pt/2011/03/58-1.jpg
https://static1.pt-content.com/images/pt/2011/03/59-1.jpg
https://static1.pt-content.com/images/pt/2011/03/60-1.jpg

[ramlinman]

and you do commercials too.....

[fletcherscustoms]

any pics of the cuts you made before welding in the flares?? Trying to figure out exactly what was added

[bg5512]

More pics!

[ChevelleNV]

More pics!
Be patient, like a drug dealer they don't want you to OD on too much at once...they will keep you hooked for a long time... :)

[Six_Shooter]

Be patient, like a drug dealer they don't want you to OD on too much at once...they will keep you hooked for a long time... :)

LOL...
I've been clicking on this thread trying to get my fix for a while now. haha.

[bg5512]

I'm not creative enough to come up with my own ideas, so I've got to rely on the Pro's

[Ringbrothers]

Pretty good looking underside.
https://static1.pt-content.com/images/pt/2011/04/78-1.jpg

[Chevrolaine]

Yup, Now get to it on the topside!
Staci, are you guys open Friday? My brother may swing up to buy some hood hinges for his 69.

[TomT]

I especially like the fender flares/bulges at the top of the wheel openings...and there's just something very cool about seeing a body on a rotisserie!

[Ringbrothers]

Staci, are you guys open Friday? My brother may swing up to buy some hood hinges for his 69.
We will be here tomorrow 8-5. Tell him to stop by. What's his name?

[Chevrolaine]

We will be here tomorrow 8-5. Tell him to stop by. What's his name?
Craig and his wife Teresa, I may tag along also. Thanks.

[Ringbrothers]

These are the door hinges that we just finished developing after three years. Pretty amazing stuff here! The guys got sick of the doors on these second gens tearing out the door hinges. Took a while to get them right - going to production after one minor modification.
https://static1.pt-content.com/images/pt/2011/04/DoorHinges3-1.jpg
https://static1.pt-content.com/images/pt/2011/04/DoorHinges-1.jpg
https://static1.pt-content.com/images/pt/2011/04/DoorHinges2-1.jpg

[ChevelleNV]

https://static1.pt-content.com/images/pt/2011/04/DoorHinges2-1.jpg

Those are beyond sick, any chance the will fit an A body?

[72camarors]

I'm glad these second gens are finally getting the recognition they deserve! Car is looking awsome! I'm pretty sure these car's car going to skyrocket in the next few years especially with guys like you building these high end cars.

[TT302Z28]

Wow, those hinges are sick! Will there ever be a 67-69 version?

[Roberts68]

It sounded to me that RB saw a need for the hinge, a necessity due to the lengthy heavy second gen door fatiguing the hinge. Would it not be that they were conceived of form and function before bling?

[LeighP]

Those are a damn fine looking hinge...nice and strong.
Any chance of some more detail on them?

[newmexicosaint]

please post some more information...what they are made of and what the new engineering entails. they look SICK!!! what is going to make them last vs. the shortfalls of the stock hinges?

The need is FINALLY BEING MET!! Thanks to the Ring Brothers.

Oh, what about price? Did I miss it?

[ccm399]

please post some more information...

Oh, what about price? Did I miss it?

Here ya go...

Second Gen Door Hinge Info (https://www.pro-touring.com/showthread.php?79166-2nd-Gen-Camaro-Firebird-Billet-Door-Hinges)

I just might need to order a set of those when I get to that point....

Chris

[LeighP]

Thanks.

[newmexicosaint]

Here ya go...

Second Gen Door Hinge Info (https://www.pro-touring.com/showthread.php?79166-2nd-Gen-Camaro-Firebird-Billet-Door-Hinges)

I just might need to order a set of those when I get to that point....

Chris

Thanks Chris. I don't know how I missed that but thanks!!

[PARKERRS]

Now if we can talk the Ringbrothers into a set of trunk hinges just as nice with maybe a gas strut versus the torsion rod design of GM I'd be all set. The trunk lid is the second biggest problem on these cars as evidenced by all of the prop rods you see in use on them.

[manicmechanic]

Now if we can talk the Ringbrothers into a set of trunk hinges just as nice with maybe a gas strut versus the torsion rod design of GM I'd be all set. The trunk lid is the second biggest problem on these cars as evidenced by all of the prop rods you see in use on them.

+ 1,000 I would like to see this as well, have thought about the gas struts as well. When I get to area on my 71 Bird I was thinking about trying to add the struts from behind the hinge to help with holding the lid up Vs. being a opener. Like to try to keep them hidden. Something I have seen lately on the newer cars that are sporting monitors mounted on the inside of the trunk lid are billet spacers that go in between the hinge and the trunk lid pocket.

[John Wright]

There is a dramatic difference between the 1st and 2nd gen trunk hinge setup, so the gas strut thing on a 2gen trunk may be a bit complicated. I was wondering if someone may be able to use a ratcheting system similar to something like on a air hose reel?

[Dalamar]

Excellent work, I love seeing the progress, and really like the back valance and pan.

[hefs72]

Just curious Maybe this is already in the thread but what size tires are you guys running on the front.

[ccm399]

1970 Camaro we've been working on.
Mast Motorsports LS7 640 hp
Tremec 5-Speed
Ford 9' Rear with Locker
3-Link Rear Suspension
DSE Quadralink Hydroformed Subframe
Forgeline Wheels
BF Goodrich Tires - 275 35 18 Fronts, 335 30 18 Rears
Flowmaster 40 Series Mufflers


Post #1.

[ccm399]

Thanks Chris. I don't know how I missed that but thanks!!

Sure Gene,

I happened across that thread in my "spare" time. Glad to help.

[hefs72]

Thanks. Was wondering on the backspace for the front. What was the reason for doing the flares in the front was it because of the front ride height. Im working on a second gen also with the same size fronts and am planning on running it a little lower than normal and the front is tight REAL Tight. i think mine are 6.2 bs

[manicmechanic]

It's been a month an a half, can we get some updates?

[Ringbrothers]

Who can guess which tires go in the rear?
Michelin 315/30 18
Michelin 345/30 19
https://static1.pt-content.com/images/pt/2011/08/Tires-1.jpg

[ChevelleNV]

Who can guess which tires go in the rear?
Michelin 315/30 18
Michelin 345/30 19

Of course the Michelin 345/30 19, do I win a car????

[WS6]

So how are things coming with the car? Will it make SEMA this year?

[LeighP]

Hope to see more on the car soon.......I'm waiting for those hinges!!!!!!!! :)

[Ringbrothers]

BASF will be hosting the unveiling of Bob and Char's 1970 Camaro Diversion at SEMA on Tuesday November 1 at 3:00 pm. Doing the honors will be Bill Goldberg. We would like to thank BASF and Bill for making this happen.

Once the car has been unveiled I will post pictures and a youtube video of the event. Should be awesome!

[ramlinman]

can't wait

[Bryce]

See you there!

[ChevelleNV]

Ill be the guy drooling on the car... :)

[Chevrolaine]

Sweet!!

[coolwelder62]

I hope I get a chance to see this one.

[solarguy09]

50153Wow......Now that is a build.............Wow...

I was jacked up at what i am doing to my car, but holy cow....One sweet Car.....again, WOW...

[WEAVER]

I talked to Mike the other day, He's excited about this car and the new Mustang, Should be a good show for you guys

[linkstar69]

Such great metal work, truly inspirational

[Ringbrothers]

It was an honor to have BASF host the unveiling of the 1970 Camaro Diversion. Thank you to Bill Goldberg for presenting.
https://static1.pt-content.com/images/pt/2011/11/DSC03119-1.jpg
https://static1.pt-content.com/images/pt/2011/11/DSC03120-1.jpg
https://static1.pt-content.com/images/pt/2011/11/DSC03122-1.jpg
https://static1.pt-content.com/images/pt/2011/11/DSC03117-1.jpg
https://static1.pt-content.com/images/pt/2011/11/DSC03115-1.jpg
https://static1.pt-content.com/images/pt/2011/11/DSC03123-1.jpg

[devwil68]

holly cow! that came out amazing!

[Hunter68]

jesus! i dont even want to try

[Chevrolaine]

Outstanding! Great Job Guys!!!! Less partying, more pics Staci!! ;)

[aps63]

Amazing quality and workmanship.
Makes me want to work harder to up the quality of my own ride.
Thanks for the inspiration.

[WEAVER]

Great job guys..very nice

[BigMal69]

Absolutely amazing!! Great work again guys

[Lycan]

State of the art!!! More pics please

[LeighP]

Beautiful!!!! Absolutely gorgeous....total work of art!
Now go home and get those billet 2nd gen door hinges in production.....I need them!!! Please!!!!!
Just ordered your airframe hood hinges the other day, hope to have them in my hands in the next couple of days.

[darkgable79]

Damn!

[zipsimons]

Staying true to this industy's top shelf craftsmen as usual I see! Fine work

[LSxChevelle]

Wow! Amazing work all the way around!! Great job on modern interior and keeping the same dash style. Simply amazing guys!

[85coupe50]

Another Amazing car brought to you by the Ringbrothers! Very cool ride!

[Chevrolaine]

Now go home and get those billet 2nd gen door hinges in production.....I need them!!! Please!!!!!
.
I believe those are already available, just not on the website yet. $500/set.

[qnitro]

Is that True?? Ive been waiting as well.. Im going to put some on my 1975 T/A Im building


I believe those are already available, just not on the website yet. $500/set.

[Chevrolaine]

Is that True?? Ive been waiting as well.. Im going to put some on my 1975 T/A Im building

Well, Staci will have to verify it of course but I know back in April/May that she had threads about their availability and pricing on here and Nasty.
I'm sure she'll fill us in once all the SEMA stuff ends. Busy gal!

[preston]

Love to see some higher quality pictures. How about one of the whole car ?

Does $500 for a set of door hinges really seem like a good idea for anybody building a real world car ? I know we all have different priorities bla bla bla but I just can't wrap my head around it when there are so many other places on a nice car to use that $500.

[ccm399]

Well, Staci will have to verify it of course but I know back in April/May that she had threads about their availability and pricing on here and Nasty.
I'm sure she'll fill us in once all the SEMA stuff ends. Busy gal!

I believe there is a thread on here that talks about a delay in release. I think they are looking at closer to the first of the year. But as Chevrolaine says I am sure Staci will let us know.

[ccm399]

HERE (https://www.pro-touring.com/showthread.php?79166-2nd-Gen-Camaro-Firebird-Billet-Door-Hinges&p=798560#post798560) Is a link to the post from Staci about the release date target.

Chris

[LeighP]

Yes, they are delayed...I've been in regular email contact with Staci on getting a set as my car is going into the panel shop very soon.....would really love to have them available for my car when it's being finished off. Fingers crossed they show up soon.....
I love how this Camaro is easily identified as a Camaro, yet there is virtually nothing at all on thats stock GM.....thats a smooth piece of design to be able to do that.

[08zo6]

Here are some more pics of the car.
Thanks for all the coments.

https://static1.pt-content.com/images/pt/2011/11/SEMADay2105-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2052-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2055-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2056-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2061-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2064-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2067-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2078-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2089-1.jpg

https://static1.pt-content.com/images/pt/2011/11/SEMADay2096-1.jpg

[ccm399]

So is the rear spoiler "just" adjustable or is it active?

[08zo6]

So is the rear spoiler "just" adjustable or is it active?

It's just adjustable. Although, I could send the passenger out the window with a wrench!:)

[LeighP]

Isn't that why you carry passengers? :)

[ccm399]

It's just adjustable. Although, I could send the passenger out the window with a wrench!:)


Isn't that why you carry passengers? :)

That's good stuff right there! I thought maybe the button looking device by the gas pedal might add a little wing to her when the driver bumps it... :)

[brrymnvette]

Looks awesome! Just wish there wasn't so much of what looks to be the "Eleanor" influence.

[BigMal69]

Just plain awesome!!

[65wildstang]

Absolutely beautiful. One of the prettiest things ive seen since fake tits!

[linkstar69]

Absolutely beautiful. One of the prettiest things ive seen since fake tits!

Lol, not Tara Reid's though

[sixgunsblazing]

Seriously cool car.

[mc84_zz4]

Wow, extremely nice! Kudos for the spoiler work, front to back, every bit.
The interior looks amazing.

[colt zantop]

yeah...it don't get much better than that...awesome work!

[csx4766]

Simply Beautiful!

[ramlinman]

once again no let downs here. just fantastic

[kamaro]

https://static1.pt-content.com/images/pt/2011/03/53-1.jpg



Where do they sell that tire fitment checking tool??? .. Thats EXACTLY what I was looking for!

[67 ls1 vert]

they cost about 7-800 bucks!

[kamaro]

they cost about 7-800 bucks!

:scared:

[dontlifttoshift]

From a site sponsor http://www.jcgrestorationandcustoms.com/parts/

here is the one originally inquired about http://wheelworksinc.com/index.php?option=com_content&view=article&id=78&Itemid=118

[ramlinman]

could be a useful tool

[mdes0]

Is the front and back glass flush fit? If so how was it done?

Thanks and sick car! I'm just finishing up a quadra link in my 70. Hoping to be done the car by the time I'm 40... 11 months to go.

Matt

[pedro gonzalez]

matt in high performance pontiac magazine they did a story on the year one bandit transam 3,flush fit glass on that 2nd gen fb they weld a .025 inch spacer in the channels,back glass is a one off made.

[solarguy09]

Is the front and back glass flush fit? If so how was it done?

Thanks and sick car! I'm just finishing up a quadra link in my 70. Hoping to be done the car by the time I'm 40... 11 months to go.

Matt

Too Funny..I wanted to be done at 50....I am 52, and still working on it...


One sweet Car you are working on Kamaro....

[Chauncey1970]

Does anyone know the colour of this camaro it is the best colour I have ever seen
many thanks

[zombiekiller]

for a 42 year old, she sure has a great ass ( the car, not tara reid).