Custom Carburetor Spacers?

[kryptik]

Hello guys,

I was wondering if you knew of any shop who can fabricate a custom PHENOLIC 4-hole carburetor spacer. My application requires that I use a spacer of this size, and this size only: (1.500" +.125/-.000 tolerance). It must be phenolic and it must be 4-hole for a holley 4150 square bore.

Any tips will be GREATLY appreciated. Thanks for your time.

Cheers,
Matt

[Ollie8974]

E-bay Search Key words, Phenolic 4 Hole Carburetor Spacer. Turned up 6 listings, they were for 1 or 2 inch spacers. You could contact the sellers to inquire about the 1 1/2 inch spacers. Or use the 1 inch spacer and two of those 1/4 inch thick gaskets.