PDA

View Full Version : F/S - Polished brake booster, wilwood master cylinder, AN fitting



lvrpool32
01-03-2011, 09:32 AM
I went to a manual dual master cylinder brake set up on my 69 corvette, so I am in the process of removing the polished stainless vacuum booster (its a 7" dual diaphragm, so smaller than stock, but works fine and looks better due to the compact size), the booster also has a polsihed billet vacuum fitting with a 6AN fitting (I can include a stainless braided or black nylon braided hose to go with it)I also have a Wilwood tandem master cylinder (1-1/8 bore) and polished stainless hard lines that go to the factory distribution block (for a corvette)

$250 for the compelte set up + shipping. I can take paypal

Cheers
Nic

wellmaintained
01-03-2011, 11:05 AM
any pics?

lvrpool32
01-03-2011, 12:29 PM
any pics?

I'll get some tonight.

Nick

lvrpool32
01-03-2011, 04:34 PM
Heres a quick pictures,needs to be cleaned, a little dusty.

Nick

67gtonut
01-03-2011, 06:01 PM
Instereted......

Any way to know if this will work in a 67 GM A-Body?

lvrpool32
01-03-2011, 06:47 PM
Cant say with any certainty. The booster has 4 studs on the back for mounting, and the master cylinders bore is for a power set up, with at least discs on the front.
I can even include a factory GM proportioning/distribution block.May take a little fabrication like line bending, but nothing major.

Nick

lvrpool32
01-04-2011, 07:06 AM
Bump for price drop