the best way to install dse connectors

[johnny68]

need to start thinking on how the best way to install the connectors after i center the sub frame
on a two post lift with the car level this is easiest but is it the correct way
or on jack stands as if car would be on its wheels in its natural form
ive only seen it done on 2 post lifts in all the magazines but is this the correct/best way
i would think doing it as if the wheels were on it would be the best your opinion would be greatly appreciated thanks
john

[badbowtie1]

I would definitely weld them in a done car with it sitting 100% level and sitting on jack stands on the rear axle and maybe the car ramps under the front tires. If the car is not level or sitting jacked up that is the way it will stay after they are in. When I say done car I mean complete driveline and all weight of car. I have seen them welded in with no driveline and no front sheet metal on lifts.