New Member 79 Ta

[Mr.Nobody]

Hello Everyone.
I just wanted to introduce myself.
My name is Daniel and I'm from Germany.
Im following this nice Pro Touring site for quite a few time and at the moment I'm restoring a 2nd gen Trans Am.
Got big plans but for now the body is being restored.
The car was sandblasted and it seems like this was my first fault.
The car rusted again before I was able to put EP on it.
I dont know what will be the best method to remove the rust again as it is deep in the sheet metal.
Does anyone know what I could do best to save the body?Its a damn shame as the body was unusual good for a F-Body......
Well I hope I will post as much of my progress as possible in the future......:cheers:

[79-TA]

Hey, it's good to see another Trans Am owner on the boards. Good luck with your sheet metal situation. Hopefully someone will have some good advice for you.

Do you have any pictures of your car that you could post?

[CruizinKev]

welcome aboard! :twothumbs
where you're located in Germany? got any pics of the TA?

[NOT A TA]

Welcome! Maybe if you explain how bad the rust is or post some close up pics of it someone will have suggestions. I would start a different thread for it in the paint and body section.

[David Sloan]

Welcome to the site !

quote from NOT A TA
Maybe if you explain how bad the rust is or post some close up pics of it someone will have suggestions. I would start a different thread for it in the paint and body section.
What he said^

[Mr.Nobody]

Ok guys.Thanks for the warm welcome.
I'll start another topic in the paint section but I'll have to make some close up pics first.