Mast Motorsports now has 14 different fully ported CNC Cylinder Heads

[MastMotorsports]

Mast Motorsports recently acquired Performance Induction Specialties in Walled Lake, MI (a state of the art manufacturer of cylinder heads and intake manifolds). The acquisition will enable Mast Motorsports to dominate the LS cylinder head and induction marketplace with 14 different cylinder heads from LS1 / LS2 cathedral port, LS3 & LS7 ports, to raised runner race ports in 3.9, 4.0, 4.07 and 4.1+ bore sizes and a full line of 2 piece fully ported CNC race intake manifolds with carbureted or fuel injection options. The Mast Motorsports manufacturing facility will remain in Michigan and utilize the very latest manufacturing equipment including CAD modeling and design, 5-axis CNC machines, mold makers, 4-axis valve job machines and state of the art flow bench.

For more information go to http://www.mastmotorsports.com/2010/news-view.php?id=64


LS3 11 Degree Med Bore CNC Cylinder Head
https://static1.pt-content.com/images/noimg.gif

LS7 12 Degree Large Bore CNC Cylinder Head
https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

[MastMotorsports]

Added Pics

[The WidowMaker]

thats good news. will any of these new heads make it to the ls3 crates?

i plan on running one of your 416 or 427s in my car. your prices seem to holding steady, i just hope they are still that way a year from now when im ready to buy.

Tim

[MastMotorsports]

thats good news. will any of these new heads make it to the ls3 crates?

i plan on running one of your 416 or 427s in my car. your prices seem to holding steady, i just hope they are still that way a year from now when im ready to buy.

Tim

Yes! We currently run these on our Black Label Engines.

Thanks,