69 firebird engine mounts for chevy engine

[doribak]

the previous owner did some lame plates to hold the engine mounts for the 383 chevy stroker i got right now.
the frame is the original 69 firebird frame but the mounts are 2nd gen mounts.
what i want to know is the 69 camaro has the exact frame? if it does how do i mount the mounts on the properly and not with half bolted plates... the engine block is from 85 but if i change the mounts of the frame and the block it should line up properly?

this is how it looks right now.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

[MrQuick]

it should...pull all that off and post a picture. should have three holes for these brackets.

https://static1.pt-content.com/images/pt/2010/08/210JPG-1.jpg

[doribak]

i can't take them off because the frame is already on the car.

i was hoping someone has the knowledge to help.

can i retrofit 69 mounts to newer block for sure?

[dhutton]

Same subframe is used for Firebird and Camaro. The Chevy mounts should bolt right on.

[NASH JUDGE]

Same subframe is used for Firebird and Camaro. The Chevy mounts should bolt right on.
thats right......maybe put a pontiac back in ?

[doribak]

i prefer my chevy 383 stroker :)
the other thing i didn't get an answer for does the other side of the mounts, the part that attach to the engine block can bolt to a 85 350 block the same as 69 350 block?