7.5ltr_442
07-20-2010, 06:11 AM
Has anyone ever installed the nylon fuel lines? I recently redid my complete fuel system with. I installed a new motor and noticed at the initial start up the bowls weren't filling them selves after i had manually filled them. I traced it back to my line going into my regulator and found the rubber inside the line was about 5 inches from the fitting and bunched up cutting off the gas. What was wierd is that the braided portion of the line was still in the fitting. Does anyone have an idea what went wrong as i'm replacing it today and don't want the same result. Thanks