6.0l into 69 camaro

[greycamaro]

looking at putting a 6.0l into my 69 camaro. Have seen people notch the frame and such for the ac and alt. Will I have to do this?

[68topls]

The notch was only done for the A/C compressor. And this was for only when using the stock f-body accessories in the stock location. The alternator will fit but there have been a few people complain about having to take off the cover to fit the the alternator. It depends on what style of accessories your going to run and what motor mounts you use. This thread is a good start as it details how their complete build was done.....with out notching the frame....:

http://www.ls1tech.com/forums/conversions-hybrids/684612-story-our-ls1-swap-into-67-camaro.html#post6791708

[LS1NOVA]

Id rather have notches in the frame then have the engine so far forward and lose accessory drive to fan clearance and oil pan to steering clearance.