Kiwi Mal
05-30-2010, 11:27 PM
Hi Guys. I am building a new engine for my Sunbeam Tiger. I have just purchaced a 5.0 windsor short block.
- Roller block
- Balanced internals (50oz)
- Speed Pro coated pistons
- Main girdle
- ARP main cap bolts
- ARP rod bolts
- Balancer
This block was out of a Panoz race car. It is in good condition. He took the mains caps off, and a big end, and the bearings looked like new.
I am going to use GT40P heads which need new exhaust seats, so while I have this done I have the options of better valves etc.
The roller cam I got with the block has GT stamped on it. I am having trouble finding info on it, so I need to know the spec's. If anyone know's them or where to find them, it would be appreciated.
I want to build a good strong street engine with good manners. Max power at approx 5500rpm.
Any input welcome
Thanks Mal.
- Roller block
- Balanced internals (50oz)
- Speed Pro coated pistons
- Main girdle
- ARP main cap bolts
- ARP rod bolts
- Balancer
This block was out of a Panoz race car. It is in good condition. He took the mains caps off, and a big end, and the bearings looked like new.
I am going to use GT40P heads which need new exhaust seats, so while I have this done I have the options of better valves etc.
The roller cam I got with the block has GT stamped on it. I am having trouble finding info on it, so I need to know the spec's. If anyone know's them or where to find them, it would be appreciated.
I want to build a good strong street engine with good manners. Max power at approx 5500rpm.
Any input welcome
Thanks Mal.