PDA

View Full Version : Hyraulic clutch questions



EFI69Cam
05-04-2005, 05:10 AM
My K#3sler clutch master's fill/reservoir port sits right underneath the brake booster. The 4th gen booster I swapped in has a flat surface at that point. Upshot is the straight nipple they supplied won't fit by itself, much less with a hose on it.
My question is if there is problem putting a 90' fitting on the fill port, then putting the nipple in the 90.

TitoJones
05-05-2005, 08:27 AM
That should be fine. That is how the factory hydraulics are on my T56 kits.

Tyler

EFI69Cam
05-05-2005, 01:35 PM
That should be fine. That is how the factory hydraulics are on my T56 kits.

Tyler


Thanks dude.

I'll say this publicly. After dealing with Keisler, I should have bought your kit.

TitoJones
05-09-2005, 10:23 PM
Thanks dude.

I'll say this publicly. After dealing with Keisler, I should have bought your kit.

Well, I appreciate that comment very much. Next project, we'll set you up. ;)

Tyler