OK my magazine is missing on swapping an LT1 intake,

[MonzaRacer]

I am looking at installing a LT1 intake on the 283 going into my car and after having seen several I need to find a copy of article on using hose fittings and a remote mount thermostat housing. I dont really care where the instructions come from but like it because it had good pics, also I heard that the upper hoses could be pulled from the rear of the intake rather than the front.
Any thoughts on the ability to do this even?
I know many of the street rodders have done it I just misplaced my reference materials.
Got the intake cheap and intend to use it.

[130fe]

http://www.popularhotrodding.com/tech/0803phr_tpi_intake_conversion_ls1/index.html
Is this the one?

[MonzaRacer]

Looks like it, Thanks.
Guess lt1intakes.com is gone

[Samckitt]

The toughest part will be welding/machining the part for the distributor. Used to be a guy that converts the intakes to work on standard Chevy heads/block, but looks like his website is now down (www.lt1intake.com)

https://static1.pt-content.com/images/noimg.gif

Pics of water ports at the rear of the intake:
https://static1.pt-content.com/images/pt/2010/05/Intakedone7-1.jpg

[Olav]

http://www.96z28ss.cz28.com/photo3.html

http://www.blown383lt1.com/distpage.html