View Full Version : DSE wiper motor Chevelle
brans72
04-26-2010, 06:16 PM
I was wondering anyone hidden or got something different then stock mounted DSE wiper motor. Looking for ideas before finish shaving my firewall. Pictures would be Great. Brandon
The WidowMaker
04-26-2010, 08:12 PM
i plan to do something, but you can be the guinea pig. we have a TON of room in the cowl to rig something up, so im not sure that we need to hide it in a fender like some of the other cars. id like to find a modern varible speed motor though.
brans72
04-27-2010, 05:47 PM
Yeah I know what you mean there. I am still debating since we are in process of shaving the firewall.
MCMLXIX
04-27-2010, 11:28 PM
I bought a wiper motor form a 1997ish S10 out of the Pick-a-Part yard... It has 3 mounting holes but uses a much larger bolt then my 67 Chevelle. Two of the three mounting points are on the same plane and on is slightly higher. This may need a spacer or a plate similar to DES, all depends on your application. I already relocated the factory mounting hole to under the driver fender just to clean up the firewall. I can always just cut that back out and make a new mount...
https://static1.pt-content.com/images/noimg.gif
I also found the wiring diagram from a guy on an S-10 forum. I just need to figure out how to read the schematic correctly to figure out a switch... I also don't know if the S10 has a PARK feature for the wipers. I did read where that was bypassed but again, depends on your application.
here is a link to a thread with the schematic... (to keep the S10 wiring info centralized) https://www.pro-touring.com/forum/showthread.php?t=61011
Powered by vBulletin®