radiator hose help

[yellowrallys]

hey guys, I have a 69 Camaro BB with a Sanden a/c compressor mounted with Alan Grove mounts on the driver side. The car has a Be Cool radiator (the one for the car, not the universal). The upper inlet end is about 2" from the compressor pointing directly at it. Any suggestions on a hose? I could cut the thing off and reweld it, but I would rather find a hose. Thanks.

[paul67]

Fit a prebent hose from another car with a tight 90 deg then fit a piece of steel or stainless inside and carry on to were it has to go .
paul67