PDA

View Full Version : door jams



paint2361
02-23-2010, 12:18 PM
I'm repairing rust on a 67 firebird. I would like to replace the driver side rear lower door jam/piller. (Just the lower curved part). So far all I can find is the intire quarter panel with the door jam. Does anyone make just the door jam or half of a door jam?

vintageracer
02-23-2010, 07:23 PM
None that I have ever seen.

Contact Goodmark or whoever makes/sells the quarter panel side you need and see if they have a damaged quarter panel with with a good door jamb that you need. If they do you can usually get a smokin deal since the panel is damaged and would be junk for them but has a usable section that you need.

67 455 Bird ragtop
02-28-2010, 05:50 AM
What I did a while back was similar to what vintage suggested. But, I posted it on a bunch of F'body sites. Looking for people who were replacing their full quarters and jambs. Found a cpl of folks who cut the jambs from their old quarters and send them to me. Worked out pretty well. Was VERY cheap. Both just wanted me to pay for the shipping.