chevydmax06
01-21-2010, 05:06 AM
Hey Guys Im new to PT...I have a 1968 Mustang Coupe in the body shop. I have had the car for 4 years as of now...i started the restore about 1 1/2yrs ago and am getting down to the crunch line...its a complete resto-mod.. i will be adding pictures when i can get them uploaded...im almost ready for paint which im excited about..i was reffered to PT from a friend..he said if i had any ?s PT could answer..
Here is a little about my plans for the Stang.
i have recently built a 347 roller..internals: Scat forged crank and H beam rods...Kieth Black Forged 2v pistons...Comp Thumper Cam and Comp lifters...E7 cylinder heads ported ploished..3 angle dgree valves 202. 160.- with chevrolet 305 valves...Edelbrok Air Gap dual Plane intake...1:6 comp rockers
Here is a little about my plans for the Stang.
i have recently built a 347 roller..internals: Scat forged crank and H beam rods...Kieth Black Forged 2v pistons...Comp Thumper Cam and Comp lifters...E7 cylinder heads ported ploished..3 angle dgree valves 202. 160.- with chevrolet 305 valves...Edelbrok Air Gap dual Plane intake...1:6 comp rockers