Baer Brakes Price???????????

[WELTERRACER]

Can anyone on this site beat this price for brakes for a 67 camaro..

Front TRACK CLAW $999

Rear TOURING CLAW $750

Shipping $100

If you can beat these prices email me... Could be a sale for you!

[TEDDYS CAMARO]

Can You Give Me The Part #'s To The Baer Brake Kits. I Will Let You Know If I Could Beat Those Prices. I Am A Distributor For Lane Automotive/motorstate. I Can Also Get Prices On Anything Else You Might Need. Just Give Me Part #'s And I Will Let You Know How Much. I Know How It Feels When You Are Trying To Build A Car, And Save As Much As You Can. I Am Always Happy To Help This Pro-touring Web Site.

[WELTERRACER]

I dont have the part numbers..

They are the kits for a 67 camaro... That is all you should need to know.. Track kit for the front and touring kit for the rear!

[rocketrod]

Check out this place http://www.tbyrnemotorsports.com they have the BEST prices on Baer.

[LTorres]

If your considering Wilwood here is my price to you from this forum.

$701.88 Pro-Series front hub kit
140-7675-D 12.19"x.866" Cross-Drilled and slotted rotors, with 4 piston Dynalite calipers, brackets, pads, hardware, and probaly the best looking Billet hubs with bearings and seals you ever set eye's on, and Instux.

$718.00 Pro-Series rear kit with Park-Brake
140-7141-D (part#depending on wheel rear axle offset) 12.19"x.866" Cross-Drilled and slotted rotors, with 4 piston Dynalite calipers, brackets, pads, park brake provisions, and instrux.

Buy both and I'll take 5% off as a front/rear discount. So your total price then would be $1348.88. And as many know on this forum I do free shipping to anyone on the Pro-touring website!!

Thanks L. Torres
Out west

[WELTERRACER]

If your considering Wilwood here is my price to you from this forum.

$701.88 Pro-Series front hub kit
140-7675-D 12.19"x.866" Cross-Drilled and slotted rotors, with 4 piston Dynalite calipers, brackets, pads, hardware, and probaly the best looking Billet hubs with bearings and seals you ever set eye's on, and Instux.

$718.00 Pro-Series rear kit with Park-Brake
140-7141-D (part#depending on wheel rear axle offset) 12.19"x.866" Cross-Drilled and slotted rotors, with 4 piston Dynalite calipers, brackets, pads, park brake provisions, and instrux.

Buy both and I'll take 5% off as a front/rear discount. So your total price then would be $1348.88. And as many know on this forum I do free shipping to anyone on the Pro-touring website!!

Thanks L. Torres
Out west



HOW MUCH FOR THE 6 PISTONS FRONT SET?

THANKS

[LTorres]

If a six piston setup is your choice then your total price front/rear would be $$2145.00 to the door (No shipping, No tax). I could do this kit with either a 12.20" rotor or a 13" set-up.....What diamater wheels are you running?

[WELTERRACER]

Well ,the guy(PROTC) who i got the prices for ended up buying the complete BAER kit from T BYRNE MOTORSPORTS for a very very very low price.. $1576 front and rear kit with mastercyl and porportioning valve.. with 13inch rotors front and 12inch rear!

track front kit... and sport rear kit..with the cross drilled and slotted rotors!

[Roger Poirier]

I just received my Bear brakes from a local distributer. Eight weeks before they arrived. Then I open the box, they forgot to send the reworked spindles. They had to send them next day air out to me. Their customer service is terrible, and I mean terrible. Always a different story told to me by Bear every other week for the delay. Finally had to go to upper management to get issue resolved. R.P.

[PRO TC]

that sucks i hope i dont have any problems like that. that told me that thay were backordered for 3 to 6 weeks. i guess its spring and im not the only one ordering brakes. thanks rocketrod for the web site very nice people. any one looking for the stock 4 piston calipers rotors and spindles and new brake hoses and pads email me thay will be 4 sale once my parts come in

pro tc