1969 Camaro RS Stripes

[SinbadSailor23]

Can anyone tell me the correct spacing for 69 Camaro RS Hood and Trunk stripes?

I've seen them a couple different ways on the trunk lids, some trunk stripes are farther apart and some match the gap of the hood stipes.

Which is correct?

Sinbad

[63SW]

Do you still ned this information ?

I have all the factory specs i can send you a copy & diagrahm.

heres the car i just did them on.

the distance on the rear is much different from the hood ...

there is a complete diagrahm in the book ..69 camaro assembly manual. that has all the fac secs for front & rear.

[SinbadSailor23]

Yes, still need the specs. So the stripes on the rear deck lid were separated farther apart from the front hood stripes.

Jack

[SinbadSailor23]

Here's what I have on the one I just purchased 2 days ago.

[SinbadSailor23]

I like them evenly spaced but if it's not the way they came from the factory then I will change them.

[63SW]

Nice looking car !

It doesnt Look like they are set as factory did them.

I see 2 things wrong.

1 - the spacing is off from fact.
2 , the stripes do NOT show on the back of the deck lid under the spoiler.
from the factory , the stripes went half way under the rear spoiler and stopped , they did not follow through all the way .

this is how it should be.
Jest send me a address and i will send copies of the specs from the GM ASSEMBLEY MANUAL/

[rwhite_692]

Having done the stripes on several cars, I can say that spending the $60 or so for the stencil (precut vinyl masking) kit is money well spent. You can get them from Stencils and Stripes Unlimited, and a few others.