Log in

View Full Version : NEED HELP! Pinstripe EMERGENCY for PHR Project Mustang



MilesSpeed
11-11-2009, 10:27 AM
Hey all!

I'm at JCG Restoration in Oxnard, CA finishing up the Mustang's paint work and really needs someone to pinstripe the car between the two colors on the body line at the top of the fender/door/quarter panel. I was hoping to do about 1/8-1/4 inch black stripe.


If anyone who knows they can knock out a nice stripe to divide these colors and has the paint and bushes necessary I would REALLY appreciate some help.

I can offer credit in the 12-page cover story I'm doing on the Mustang for the March issue. I can also hook you up with lunch :)

I need to do this sometime after 1pm and 7pm Thursday November 12. I know it's short notice but that's the magazine car's life! So if you, or someone you know, is in the area and can help me out I would be very grateful.

I have limited computer access today before 7pm so please email me on my work (blackberry linked) email [email protected] ([email protected]) I won't be able to check PMs or this thread much.

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

ProdigyCustoms
11-11-2009, 11:23 AM
Real simple Liz, they should spray black on the sides where the stripe will be, then run a tape line 1/8" r 1/4" wide, paint the lower color below, tape it off and shoot the upper color, pull the tape and wala!

Like this

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

MilesSpeed
11-11-2009, 06:54 PM
I got it figured out! thanks though!

fordrule
11-26-2009, 07:24 AM
more pics!!!!!!!!!!!!!