Fuel rail covers for a 98 f-body ls1

[Andrew McBride]

At first I was planning on trying to run a 97-98 corvette fuel rail so I will have my return line, but according to what I have found searching I can run a 99+ corvette LS1 fuel filter regulator and just dump the fuel back into the tank from from the filter.

My question is: can I run a 99 and up corvette fuel rail covers without any problems on my LS1 in my 68 camaro? I don't see any differences other than the dual line cut outs in the covers and I was thinking I may need to trim the covers a bit to fit the camaro throttle body.

Thanks for any help!

Andrew

[Project Cortez]

You can contact the people at www.afterthoughtsauto.com They will have you take a picture of your engine in the car so they know what to cut/adjust etc... They will also paint to match etc.... If your looking for something really sharp contact Route 66 Motorsports www.rt66motosports.com They have a sweet one piece cover, they are also a sponser here. Ask for the owner Bill he'll help you out.

[Project Cortez]

correction www.rt66motorsports.com

[Andrew McBride]

thanks for the post. I got a set in last week and the guy that makes them cut the holes and trimmed areas that needed to be trimmed. Here it is:https://static1.pt-content.com/images/noimg.gif