68 Camaro fenders

[Vidar]

Hello !

I have bought some frontfenders for my camaro, but I cant get them to fit.
It is the one that classic is selling for $239
They are to far out frome my door, not looking good.

I bought them here in Norway, and parts arent so cheap here, because of shiping and taxes (25%)

Do you have some good ideas to get themn to fit, or can I buy some of anyone that will fit bether?
Please help me !!!

[C5DENNY69]

Hi in Norway!

Can you post some pictures of your problem? It would help with giving you advise.

But with out pictures I will take a guess at your problem and suggest that you will need to add more shims under the mounting points on top of the cowl & the bottom rear of the fender to help stretch the fender to make it taller & bring in (toward engine of car)the high spot at the center body line.

We have a 68 Camaro in our shop now with the after market fenders. We do many 67 - 69 Camaros.

We usually have to weld & modify the rear edge of the fenders to get a proper gap (width). Some times the body lines don't line up either (from door to fender) in height.

If you need more advise you are welcome to give me a call. You can get my E-mail & phone number info off the website.

I hope this is of some help to you. Good luck.

Denny Finn
Finns Auto Restoration & Custom
104 W. Main St.
Molalla Oregon, 97038

www.Finnsautorestoration.com (http://www.Finnsautorestoration.com)