Tail light question??

[powersstuntworx]

Quick question please....... On the 2nd gen camaro, rear tail lights, with parking lights on. Is it the 2 inner tail lights that should be on and then once the brake peddle in pressed, the 2 outer lights come on along with the 2 inner??? Or what? In what sequence?

Thanks guys
Powers
www.powersstuntworx.com
The best protection since condoms!!!

[joemac]

You would get a better response if you posted this in the right section. Just an fyi.

[powersstuntworx]

LOL....... I figured I was posting in wrong one, can ya help a brother out and direct me in the right path??

Thank you

[joemac]

Sorry, my bad. I should have recommended one first. I would try electrical or general tech.

[powersstuntworx]

Thanks:)

[zbugger]

It would help to know what year the car is. I could assume it's a 70-73?

[powersstuntworx]

Damn it!! Sorry, new to posting, Yes, I need to be more thorough, my bad.
Yes sir, 1970 to be exact.

Thanks for your time
Powers

[joemac]

Nice looking car anyway

[powersstuntworx]

Nice looking car anyway
Thanxs!!

[Bigblue73]

The two inner tail lights are for the reverse lights, thus they only light with the reverse switch activates them. Camaro owners please correct me as I'm going off of a car that was in our family some 35 years ago.

I see you have the billet tail lights in your car and you will have to rewire the inners to work with the outers. Are you using LED boards?

I looked at your picture again and I can't see if your inners have the white circle in the middle for the reverse lights.

[zbugger]

Looks like you've got the billet tail lights on your car. Yeah, the inners are usually the reverse lights. The outside lights work as the park/brake lamp. You'll need to wire it so the inners are hooked up just like the outers.