PDA

View Full Version : Autometer Speedo sending unit for Turbo 400



67RSSS502
04-02-2005, 04:44 AM
I am trying to get the correct sending unit to work with my Ultralight speedo and when I look at Autometers web site I am wondering if I have to order a different size drive key for the t400?

http://hp.autometer.com/instructions/005291_instruction.pdf

The unit comes standard with the .104 sq x .104sq key but lists three other options....

Thanks!

Dion
67RSSS502

ViperBlue68
04-08-2005, 03:27 PM
Dion,

When I ordered my gauge panel and gauges (autometer as well) from Covans I dont recall them asking what tranny I was running and the sending unit they sent me seems to be working fine with my th400 I'd say call Autometers tech line to make sure....goodluck

aonghus
04-19-2005, 06:09 PM
autometer only makes two electric sending units (as the pdf you linked indicates), the 5291 is the correct sender, the other sender is for a ford "style" speedometer output, you only need one drive key, as the electric speedo is adjusted according to your driving an alotted distance (I think like 2,000') or something to that affect, at a set speed, (45mph I think)

just order that sender, you'll be good.