PDA

View Full Version : EFI Plumbing Questions



Johnjan
03-31-2005, 07:35 AM
I'm putting a Stealth Ram in my '68 RS and have already installed new steel hard lines from the back of the car to the front. The fuel rails are -6 on both supply and return. Here's my question -

I've used 3/8" hard line for the supply and 5/16" for the return. I know I can get a hard line adapter to go from 3/8" to AN so that's easy. What about the 5/16" line. I've not found an adapter to do that. Have I snookered myself by using 5/16" return line? Any suggestions?

Also, can ya'll recommend a good source for the required AN fittings?

andrewb70
03-31-2005, 11:45 AM
Give these guys a call:

http://www.performanceplumbing.com/Pure_Choice.shtml

If I remember correctly I bought a 5/16th to -6 compression adapter from them.

Its not shown on the website, so give them a call.

Andrew