Need harness slot inserts for stock seats

[pitstain]

Hi guys.

I currently have a set of Corbeau LG-1 seats in my 2002 Lightning and have finally had it with their hardness, sloppy sliders, busted thigh bolster foam, and overall crappy-ness.

I have decided to go the somewhat popular route of cutting down the passnger side bench/bucket and modify it to be a regular bucket like the driver side seat.

What I would like is a shoulder harness belt passthrough, as that was the primary reason I bought the Corbeaus.
here is a picture of a factory seat:

https://static1.pt-content.com/images/pt/2009/08/expymod019-1.jpg

My plan is to cut open at the seam in the black leather right above the SVT logo, but I feel just a cut slot may be a bit ugly and also be prone to tearing out from the stress and rubbing of the harness while I am participating in HPDEs.

I would LOVE to find a set of billet harness slots, about 7 inches wide, and any help would be greatly appreciated.
Thanks in advance,
Ian Schwartz

[bbcc]

Ian, I'm looking for some harness gromets aswell. They only ones I could find are these (http://sector111.com/handler.cfm?cat_id=20219&cat_id=20445&prod_id=6061&function=product), but will only work on thin back seats. If you find some, let me know. I preffer the look of my factory seats aswell, I think it kinda adds to the sleeper look as opposed to an after market seat.